1
Optoway
XPS-6345W-DXXXG
***********************************************************************************************************************************************************************
XPS-6345W-DXXXG
(RoHS Compliant)
14.025Gbps / 40 km / DWDM XFP Single-Mode Optical Transceiver for 16G FC Applications
**********************************************************************************************************************************************************************
FEATURES
DESCRIPTION
Up to 14.025 Gbps Bi-directional Data Links
Complaint with XFP MSA
XPS-6345W-DXXXG series DWDM transceivers are
designed for single-mode fibre serial optical data
communications such as 16G/8G/4G Fibre Channel.
This module is designed for single mode fiber and
operates at a nominal wavelength of 50GHz ITU Grid, C
Band DWDM wavelength. A guaranteed minimum optical
link budget of 14 dB is offered. The transmitter section
Compliant with XFI 10G Serial Electrical Interface
Compliance with Fibre Channel 1600-SM-LL-L
Maximum Link Length of 40 km
Temperature-stabilized DWDM EML Transmitter
14 dB Power Budget at Least
50 GHz ITU Grid, C Band
consists
of
a
temperature-stabilized
DWDM
2-Wire Interface for Integrated Digital Diagnostic
Monitoring
Lineside Loopback Mode Supported
XFI Loopback Mode Supported
No reference Clock required
electrical-modulated laser (EML), driver and signal
conditioner. The receiver section incorporates a PIN
photodiode integrated with a trans-impedance preamplifier
(TIA) and signal conditioner.
The module is with the XFP 30-pin connector to allow
hot plug capability. Integrated Tx and Rx signal conditioners
provide high jitter-tolerance for full XFI compliance and no
external reference clock required. The internally ac coupled
high speed serial I/O simplifies interfacing to external
circuitry. Dual 5V and 3.3V power supply are used. The
optical output can be disabled by LVTTL logic high-level
input of TX_DIS. Loss of signal (RX_LOS) output is
provided to indicate the loss of an input optical signal of
receiver.
Power Dissipation < 3.5 W
Dual 5V and +3.3 V Power Supply
RoHS Compliant
0 to 70oC Case Operating Temperature
Duplex LC Commector
APPLICATIONS
Multi-rate 16G / 8G / 4G Fibre Channel
10G FCoE
A serial EEPROM in the transceiver allows the user to
access transceiver digital diagnostic monitoring and
configuration data via the 2-wire XFP Management
Interface. This interface uses a single address, A0h, with a
memory map divided into a lower and upper area. Basic
digital diagnostic data is held in the lower area while specific
data is held in a series of tables in the high memory area.
LASER SAFETY
This single-mode transceiver is a Class 1 laser product. It
complies with IEC-60825 and FDA 21 CFR 1040.10 and
1040.11. The transceiver must be operated within the
specified temperature and voltage limits. The optical ports of
the module shall be terminated with an optical connector or
with a dust plug.
**********************************************************************************************************************************************************************
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303
Tel: 886-3-5979798
Fax: 886-3-5979737
E-mail: sales@optoway.com
http: // www.optoway.com
2017/10/12 V2.0