☆GO-Compatible
Preliminary
◆Synchronous Step-Down DC/DC Converters
■APPLICATIONS
◆High Efficiency
◆Low Ripple
: 92%
●Mobile phones (PDC, GSM, CDMA, IMT2000 etc.)
●Bluetooth equipment
: 10mV
◆Output Current
◆Oscillation Frequency
: 600mA
: 600kHz,
1.2MHz, 3.0MHz
●PDAs, Portable communication modem
●Portable games
●Cameras, Digital cameras
●Cordless phones
●Notebook computers
◆PWM Fixed Control
:
:
:
(XC9235 series)
(XC9236 series)
(XC9237 series)
◆
◆
PWM/PFM Automatic Switching Control
Manual Selection of Switching Control
◆Maximum Duty Ratio
: 100%
◆Ceramic Capacitor Compatible
◆Ultra Small Packages
: SOT-25, USP-6C
■GENERAL DESCRIPTION
■FEATURES
The
XC9235/9236/9237
series
is
a
group
of
P-Ch Driver Tr. Built-In
N-Ch Synchronous Driver
Tr. built-in
: ON resistance 0.42Ω
: ON resistance 0.52Ω
synchronous-rectification type DC/DC converters with a
built-in 0.42 Ω P-channel driver transistor and 0.52 Ω
N-channel switching transistor, designed to allow the use of
ceramic capacitors. The ICs enable a high efficiency, stable
power supply with an output current of 600mA to be
configured using only a coil and two capacitors connected
externally. Operating voltage range is from 1.8V to 6.0V.
Output voltage is internally programmable in a range from
0.8V to 4.0V in increments of 50mV <accuracy: ±1.5%(±
2.0%)>. With the built-in oscillator, oscillation frequency is
selectable from 600kHz, 1.2MHz, and 3.0MHz to make
available the frequency best suited to your particular
application. As for operation mode, the XC9235 series is
PWM control, the XC9236 series is automatic PWM/PFM
switching control and the XC9237 series can be manually
switched between the PWM control mode and the automatic
PWM/PFM switching control mode, allowing fast response,
low ripple and high efficiency over the full range of load (from
light load to high output current conditions).
Input Voltage Range
Output Voltage Range
: 1.8V~6.0V
: 0.8V~4.0V
(50mV increments)
: 92% (TYP.)
High Efficiency
Output Current
: 600mA
Oscillation Frequency
: 600kHz, 1.2MHz, 3.0MHz
(Fixed frequency accuracy ±15%)
: SOT-25 (SOT-23-5), USP-6C
Packages
Soft-Start Circuit Built-In
Current Limiter Circuit Built-In (Constant Current & Latching)
Low ESR Ceramic Capacitor Compatible
* Performance depends on external components
and wiring on the PCB.
The soft start and current control functions are internally
optimized. During standby, all circuits are shutdown to
reduce current consumption to as low as 1.0μA or less.
With the built-in U.V.L.O. (Under Voltage Lock Out) function,
the internal P-channel driver transistor is forced OFF when
input voltage becomes 1.4V or lower.
Two types of
package, SOT-25 (250mW) and USP-6C (100mW), are
available.
■TYPICAL PERFORMANCE
CHARACTERISTICS
●Efficiency vs. Output Current
■TYPICAL APPLICATION CIRCUIT
(VIN=4.2V, VOUT=1.8V)
100
PWM/PFM Automatic Switching Control
90
3.0MHz
80
70
60
50
40
30
20
10
0
L: 1.5uH (NR3015)
CL: 10uF (ceramic)
CIN: 4.7uF (ceramic)
3.0MHz
PWM Control
3.0MHz
1.2MHz
1.2MHz
1.2MHz
L: 4.7uH (NR3015)
CL: 10uF (ceramic)
CIN: 4.7uF (ceramic)
3MHz PFM
1.2MHz PFM
3MHz PWM
1.2MHz PWM
0.1
1
10
100
1000
Output Current:IOUT(mA)
1/7
XC9235_36_37 ETR_0514_001
5秒后页面跳转
电子元器件中的网络滤波器、EMI滤波器与EMC滤波器：分类关系与功能详解
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
