XC8110/XC8111 Series
ETR33017-004a
Load switch IC with ideal diode function
☆Green Operation Compatible
■GENERAL DESCRIPTION
The XC8110/XC8111 series are load switch ICs that reproduce ideal diodes, and equipped with functions including chip
enable (CE), over current limit, inrush current limit, and thermal shutdown.
These ICs perform regulation control to ensure that their VOUT pin voltage is a value of VIN - 20mV, so they can suppress
heat generation to a greater extent than general diodes.
When a voltage is applied at the VOUT pin and it becomes equal to or higher than VIN - 20mV, the driver FET will turn OFF.
Furthermore, when the VOUT pin voltage becomes equal to or higher than VIN + 20mV, the IC’s internal power supply will
switch from VIN to VOUT, which can prevent backflow current flowing from the VOUT pin through the parasitic diode to the VIN
pin, while also interrupting current flowing from VIN to the IC.
This makes it possible to easily achieve an output voltage OR circuit, and to reduce battery consumption for backup purposes.
This IC has been certified by the international standard IEC 62368-1 that defines safety requirements,
and it is possible to simplify the single failure test of the subsequent circuits.
By adopting the foldback method for over current limiting, the short-circuit current can be suppressed to 50mA, and it can be
used safely even in the event of a short-circuit.
In addition, the thermal shutdown function can prevent the IC from being destroyed by heat.
■APPLICATIONS
● Wearable devices
● Smart card devices
● IoT devices
■FEATURES
Input Voltage Range
Output Current
1.5V ~ 6.0V
XC8110 : 500mA (VIN > 1.7V)
XC8111 : 1000mA (VIN >2.0V)
Stand-by Current
Quiescent Current
Reverse Bias Current
Forward Voltage
0.65μA
● OR Application
3.6μA
● Backup power supply
● Replacement from diode
0.8μA
20mV
Over current limit
XC8110 : 850mA
XC8111 : 1700mA
50mA
Short current
Function
Ideal diode function
Reverse Protection
Inrush current prevention
Over current limit
Thermal shutdown function
IEC 62368-1:2018 Certified
-40℃~ 105℃
■TYPICAL APPLICATION CIRCUIT
Diode / substitute for load switch
Protective function
Standard
Operating Ambient Temperature
Package
Ideal Diode : VF=20mV
VOUT
VIN
VOUT
WLP-4-02 (0.82 x 0.82 x 0.5mm)
SOT-25
(2.8 x 2.9 x 1.3mm)
CIN
CL
VIN
1.5V~6.0V
CE
0.1μF
0.1μF
USP-6B06 (1.5 x 1.8 x 0.33mm)
VSS
■TYPICAL PERFORMANCE
CHARACTERISTICS
OR circuit: backup circuit, etc.
Forward characteristics
Ideal Diode : VF=20mV
VIN
VOUT
Main Power
5V
XC8110
XC8111
CIN
CE
0.1μF
VSS
Ideal Diode : VF=20mV
0μA @ VIN<VOUT
VOUT
VIN
VOUT
XC8110
XC8111
Battery
For Backup
CIN
CL
0.1μF or more
CE
0.1μF
VSS
1/30