Datasheet > WW20NR005JTL

WW20NR005JTL

更新时间： 2024-04-09 18:57:58

品牌	Logo	应用领域
华新科技 - WALSIN		/
页数	文件大小	规格书
7页	203K
描述
2010(5025), 0.005Ω, ±5%, 1W

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

WW20NR005JTL 数据手册

Approval sheet

TEST AND REQUIREMENTS(JIS C 5201-1 : 1998)

Essentially all tests are carried out according to the schedule of IEC publication 115-8, category

LCT/UCT/56(rated temperature range : Lower Category Temperature, Upper Category Temperature; damp

heat, long term, 56 days). The testing also meets the requirements specified by EIA, EIAJ and JIS.

The tests are carried out in accordance with IEC publication 68, "Recommended basic climatic and mechanical

robustness testing procedure for electronic components" and under standard atmospheric conditions according

to IEC 60068-1, subclause 5.3. Unless otherwise specified, the following value supplied :

Temperature: 15°C to 35°C.

Relative humidity: 45% to 75%.

Air pressure: 86kPa to 106 kPa (860 mbar to 1060 mbar).

All soldering tests are performed with midly activated flux.

TEST

PROCEDURE

Natural resistance change per change in degree centigrade.

R₂− R

REQUIREMENT

Refer to

“QUICK REFERENCE DATA”

Temperature

Coefficient of

Resistance(T.C.R)

×10⁶(ppm/°C)

(

t₂− t₁

)

Clause 4.8

R₁: Resistance at reference temperature

R₂: Resistance at test temperature

t₁: 20°C+5°C-1°C

Short time overload

(S.T.O.L)

Clause 4.13

Permanent resistance change after a 5second application of a no visible damage

5 times rated power.

∆R/R max. ±(1%+0.0001Ω)

Resistance to

soldering heat(R.S.H)

Clause 4.18

Un-mounted chips completely immersed for 10±1second in a

SAC solder bath at 260℃±5ºC

no visible damage

∆R/R max. ±(1%+0.0001Ω)

good tinning (>95% covered)

no visible damage

Un-mounted chips completely immersed for 2±0.5 second in a

SAC solder bath at 235℃±5℃

Solderability

Clause 4.17

Temperature cycling

30 minutes at -55°C±3°C, 2~3 minutes at 20°C+5°C-1°C, 30

minutes at +155°C±3°C, 2~3 minutes at 20°C+5°C-1°C, total 5

continuous cycles

no visible damage

Clause 4.19

∆R/R max. ±(1%+0.0001Ω)

Load life (endurance)

1000 +48/-0 hours, loaded with RCWV or Vmax in chamber no visible damage

controller 70±2ºC, 1.5 hours on and 0.5 hours off

Clause 4.25

∆R/R max. ±(2%+0.0001Ω)

Load life in Humidity

1000 +48/-0 hours, loaded with RCWV or Vmax in humidity no visible damage

chamber controller at 40°C±2°C and 90~95% relative

humidity, 1.5hours on and 0.5 hours off

Clause 4.24

∆R/R max. ±(2%+0.0001Ω)

Pressurizing force: 5N, Test time: 10±1sec.

Adhesion

No remarkable damage or

removal of the terminations

Clause 4.32

Page 6 of 7

ASC_WW20N_V09

AUG - 2016

1...3 4 567

下载PDF

与WW20NR005JTL相关器件

型号	品牌	描述	获取价格	数据表
WW20NR005JTLJ	WALSIN	2010(5025), 0.005Ω, ±5%, 1W	获取价格
WW20NR010FTL	WALSIN	2010(5025), 0.010Ω, ±1%, 1W	获取价格
WW20NR010FTLJ	WALSIN	2010(5025), 0.010Ω, ±1%, 1W	获取价格
WW20NR010JTL	WALSIN	2010(5025), 0.010Ω, ±5%, 1W	获取价格
WW20NR010JTLJ	WALSIN	2010(5025), 0.010Ω, ±5%, 1W	获取价格
WW20NR015FTL	WALSIN	2010(5025), 0.015Ω, ±1%, 1W	获取价格