WM8510
w
Mono CODEC with Speaker Driver
DESCRIPTION
FEATURES
•
•
Mono Codec:
The WM8510 is a low power, high quality mono codec designed
for Voice over Internet Protocol (VoIP) and Digital Telephones.
Audio sample rates:8, 11.025, 16, 22.05, 24, 32, 44.1,
48kHz
The device integrates support for one pseudo-differential and
one single ended input (Handset Mic and Speaker Mic) and
includes drivers for speakers or headset, and mono line output,
making it ideal for Telephone designs. External component
requirements are reduced as no separate microphone or
earpiece amplifiers are required.
•
•
•
DAC SNR 93dB, THD -84dB (‘A’-weighted @ 8 – 48ks/s)
ADC SNR 90dB, THD -80dB (‘A’-weighted @ 8 – 48ks/s)
On-chip Headphone/Speaker Driver with ‘cap-less’ connect
-
-
40mW output power into 16Ω / 3.3V SPKVDD
BTL speaker drive 0.8W into 8Ω / 5V SPKVDD
•
•
•
•
Earpiece Line output
Multiple analog inputs, plus analog bypass path (0 or -10dB)
Mic Preamps:
Two Microphone Interfaces
Advanced Sigma Delta Converters are used along with digital
decimation and interpolation filters to give high quality audio at
sample rates from 8 to 48ks/s.
-
-
-
-
-
One pseudo-differential input
One single ended input
Programmable preamp gain
Psuedo differential inputs with common mode rejection
Programmable ALC / Noise Gate in ADC path
Additional digital filtering options are available in the ADC path,
to cater for application filtering such as ‘wind noise reduction’,
plus an advanced mixed signal ALC function with noise gate is
provided.
•
Low-noise bias supplied for microphone
An on-chip PLL is provided to generate the required Master
Clock from an external reference clock. The PLL clock can also
be output if required elsewhere in the system.
Other features
•
•
•
•
•
Digital Playback Limiter
Programmable ADC High Pass Filter (wind noise reduction)
Programmable ADC Notch Filter
On-chip PLL
The WM8510 operates at supply voltages from 2.5 to 3.6V,
although the digital core can operate at voltages down to 1.62V
to save power. The speaker and mono outputs use a separate
supply of up to 5V which enables increased output power if
required. Different sections of the chip can also be powered
down under software control by way of the selectable two or
three wire control interface.
Low power, low voltage
-
-
2.5V to 3.6V (digital core: 1.62V to 3.6V)
power consumption <10mA all-on 48ks/s mode
•
28 pin SSOP package
WM8510 is supplied in a convenient 28-pin SSOP package,
offering high levels of functionality in easy to use package.
APPLICATIONS
•
•
•
•
VoIP Telephones
Digital Telephones
Conference Speaker-phone
Mobile Telephone Hands-free Kits
BLOCK DIAGRAM
•
General Purpose low power audio CODEC
WOLFSON MICROELECTRONICS plc
Product Preview December 2004, Rev 1.2
Copyright 2004 Wolfson Microelectronics plc
w :: www.wolfsonmicro.com