Approval Sheet
TEST AND REQUIREMENTS
REQUIREMENT
TEST
PROCEDURE
Resistor
DC resistance
DC resistance values measured
Within the specified tolerance
IEC60115-1 4.5.1
Temperature
Coefficient of
Natural resistance change per change in degree Refer to
centigrade.
“ QUICK REFERENCE DATA “
Resistance(T.C.R)
IEC 60115-1 4.8.4.1
R 2 R1
6
10 (ppm/C)
R1
t2 t1
R1 : Resistance at reference temperature
R2 : Resistance at test temperature
t1 : 20°C+5°C-1°C
t2 : 125°C+5°C-1°C
Short time overload
(S.T.O.L)
Permanent resistance change after
a 5second
R/R max. ±(0.5%+0.05)
application of a voltage 2.5 times RCWV or the
maximum overload voltage specified in the above
list, whichever is less.
IEC60115-1 4.13
Measure test conclusion after 30mins
Resistance to soldering
heat(R.S.H)
IEC 60115-1 4.18
Un-mounted chips completely immersed for no visible damage
10±1second in a SAC solder bath at 260℃±5ºC
R/R max. ±(0.2%+0.05)
Solderability
1.Un-mounted chips completely immersed for 5 good tinning (>95% covered)
seconds in a SAC solder bath at 245℃±5℃
no visible damage
IEC 60115-1 4.17
Temperature cycling
no visible damage
30 minutes at -55C3C, 2~3 minutes at 20°C+5°C-
1°C, 30 minutes at +155C3C, 2~3 minutes at
20°C+5°C-1°C, total 5 continuous cycles
IEC 60115-1 4.19
R/R max. (0.5%+0.05)
Load life (endurance)
70±2ºC, 1000 hours, loaded with RCWV or
Vmax,1.5 hours on and 0.5 hours off
R/R max. (0.5%+0.05)
R/R max. (0.5%+0.05)
IEC 60115-1 4.25.1
Load life in Humidity
1000 hours, at rated continuous working voltage in
humidity chamber controller at 40C2C and
90~95% relative humidity, 1.5hours on and 0.5 hours
off
IEC 60115-1 4.24.2
Bending strength
Resistors mounted on a 90mm glass epoxy resin
PCB(FR4); bending : 3 mm, once for 10 seconds.
R/R max. ±(0.1%+0.05)
IEC 60115-1 4.33
Pressurizing force: 5N, Test time: 10±1sec.
Adhesion
No remarkable damage or removal of
the terminations.
IEC 60115-1 4.32
Insulation Resistance
R≧10GΩ
Apply the maximum overload voltage (DC) for
1minute
Clause 4.6
Dielectric Withstand
Apply the maximum overload voltage (AC) for 1 No breakdown or flashover
minute
Voltage
Clause 4.7
Flower of Sulfur
Sulfur 480 hours, 60°C, unpowered
R/R max. ±(1%+0.05)
ASTM-B-809-95
Page 8 of 11
ASC_WFxxS V01
Aug - 2018