Product specification
3
9
1206
VT
SERIES
Chip Resistor Surface Mount
MARKING
VT1206
Both E-24 and E-96 series: 4 digits
First three digits for significant figure and 4th digit for number of zeros
YNSC159
Fig. 1 Value = 162 KΩ
NOTE
For further marking information, please see special data sheet “Chip resistors marking”.
OUTLINES
CONSTRUCTION
The resistors are constructed out of a high
grade ceramic body. Internal metal
electrodes are added at each end
Marking layer
Overcoat
Passivation layer
connected by a resistive layer.
Resistive layer
Conductor layer
Inner electorde
This resistive layer is trimmed to its
nominal value and on both ends a contact
is made which will guarantee optimum
Sputter conductor layer
solderability. This is achieved by applying
H
several layers and for ease of soldering the
outer layer consists of Ni/matte tin.
Adding a special protective layer,
passivation coating, on this series to
enhance moisture resistance of the
environment.
Termination (Ni / matte tin)
Backside electorde (Ag)
Ceramic substrate
I
2
YNSC064-1
Fig. 2 Chip resistor outlines
www.yageo.com
Feb. 24, 2023 V.0