VJ OMD - C0G (NP0)
Vishay Vitramon
Surface Mount Multilayer Ceramic Chip Capacitor Solutions
for Boardflex Sensitive Applications
FEATURES
• Open Mode Design reduces risk of shorts or
leakage in board flex applications.
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
•
•
High frequency filtering for switching power supplies
100 % voltage conditioning available up to 630 VDC rating
(process code “5H”)
Contact mlcc@vishay.com for higher voltages.
Polymer termination available for intensive board flex
requirements
•
• Halogen-free according to IEC 61249-2-21 definition
APPLICATIONS
• Demanding boardflex applications
• Input filter capacitors
• Output filter capacitors
•
•
•
Snubber capacitors reduce MOSFET voltage spikes
High frequency filtering for switching power supplies
Lighting and AC power applications contact:
mlcc@vishay.com
ELECTRICAL SPECIFICATIONS
Note
Insulation Resistance (IR):
Electrical characteristics at + 25 °C unless otherwise stated.
At + 25 °C and rated voltage 100 000 MΩ minimum or
Operating Temperature: - 55 °C to + 125 °C
Capacitance Range: 10 pF to 47 nF
Voltage Range: 50 VDC to 3000 VDC
1000 ΩF, whichever is less
At + 125 °C and rated voltage 10 000 MΩ minimum or
100 ΩF, whichever is less
Dielectric Strength Test:
Performed per Method 103 of EIA 198-2-E.
Applied test voltages:
Temperature Coefficient of Capacitance (TCC):
0 ppm/°C 30 ppm/°C from - 55 °C to + 125 °C
Dissipation Factor:
≤ 500 VDC-rated:
630 VDC/1000 VDC-rated:
1500 VDC to 3000 VDC-rated: 120 % of rated voltage
200 % of rated voltage
150 % of rated voltage
0.1 % max. at 1.0 VRMS and 1 MHz for values ≤ 1000 pF
0.1 % max. at 1.0 VRMSand 1 kHz for values > 1000 pF
Aging Rate: 0 % maximum per decade
Document Number: 45047
Revision: 26-Feb-10
For technical questions, contact: mlcc@vishay.com
www.vishay.com
1