Datasheet > VHD14419K4/9K7TCR2ASB

VHD14419K4/9K7TCR2ASB

更新时间： 2024-11-21 09:05:35

品牌	Logo	应用领域
威世 - VISHAY		/
页数	文件大小	规格书
5页	457K
描述
Array/Network Resistor, Divider, Metal Foil, 19400ohm, 200V, 0.05% +/-Tol, -2,2ppm/Cel, 4019,

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

VHD14419K4/9K7TCR2ASB 数据手册

浏览型号VHD14419K4/9K7TCR2ASB的Datasheet PDF文件第2页

浏览型号VHD14419K4/9K7TCR2ASB的Datasheet PDF文件第3页

浏览型号VHD14419K4/9K7TCR2ASB的Datasheet PDF文件第4页

浏览型号VHD14419K4/9K7TCR2ASB的Datasheet PDF文件第5页

VHD200, VHD144

Vishay Foil Resistors

Bulk Metal^®Foil Hermetically sealed, Small Package,

Voltage Dividers with TCR Tracking of 0.1 ppm/°C

and Tolerance Match down to 0.001 %

FEATURES

• Temperature coefficient of resistance (TCR):

Absolute: 2 ppm/°C typical

(- 55 °C to + 125 C, 25 °C ref.)

Tracking: 0.1 ppm/°C typical

Pb-free

Available

RoHS*

COMPLIANT

• Tolerance:

absolute to 0.005 %

match to 0.001 %

• Power rating: VHD144 0.2 W at 70 °C (see table 1)

VHD200 0.1 W at 70 °C (see table 1)

• Ratio stability: < 0.001 % (10 ppm) 0.2 W at 70 °C for 2000 h

• Electrostatic discharge (ESD) above 25 000 V

• Non inductive, non capacitive design

• Rise time: 1 ns without ringing

Any value at any ratio available within resistance range

Vishay Models VHD200 and VHD144 are hermetic versions

of the molded divider 300144. The difference between them

is that the VHD144 has the full power rating of the 300144

while the VHD200 has a reduced power rating in exchange

for a full spectrum of values without the time delay for new

artwork (for values not yet tooled) and without NRE charges.

Further, the VHD200 is oil filled, providing additional

moisture protection and allowing considerable improvement

in ratio match and TCR tracking.

• Current noise: < - 40 dB

• Thermal EMF: 0.05 µV/°C typical

• Voltage coefficient: < 0.1 ppm/V

• Non inductive: 0.08 µH

• Non hot spot design

• Terminal finishes available: lead (Pb)-free

tin/lead alloy

The value of the hermetic enclosure over the molded part is

in the long term performance. Moisture and oxygen both

pass through plastic and both contribute to long term

degradation of resistive elements. Divider ratios of 1:1 are

not as likely to lose ratio with time but as the ratios become

greater, the imbalance of power has more effect on the ratio

stability and the hermetic enclosure becomes of paramount

importance.

Our Application Engineering Department is available to

advise and make recommendations. For non-standard

technical requirements and special applications. Please

• Any value available within resistance range (e.g. 1K234)

• Prototype samples available from 48 h. For more

information, please contact foil@vishaypg.com

•

For better performances, please contact us

R₂

R₁

V_in

V_out

VHD200,

VHD144

TABLE 1 - VHD200 AND VHD144 SPECIFICATIONS

STANDARD RESISTANCE

TOLERANCE

RESISTANCE

SHELF

LIFE

STABILITY

(ppm/yr)

TCR

TRACKING

AVAILABLE TO

VISHAY

MODEL

RATIO

AVAILABLE¹⁾

(Ω)

POWER RATING^{3), 6)}

ABSOLUTE

MATCH

AVAILABLE TO AVAILABLE TO

0.1 W at + 25 °C (for the entire resistive

element R₁+ R₂) divided proportionally

between the two elements (over 10K).⁴⁾

VHD200²⁾

VHD144⁵⁾

0.005 %

⎛

0.001 %

0.005 %

0.1 ppm/°C

Any value from

100 Ω to 20K

per side

< 0.5 ppm/°C

for like values

< 1 ppm/°C

standard

0.2 W at + 70 °C (for the entire resistive

element R₁+ R₂) divided proportionally

between the two elements.

Notes

R₁

------------------

R₂

R₁+ R₂

⎞

⎠

⎛

⎝

⎞

⎠

------------------

P₁

P₂

1. For resistance ratios outside the range, contact Vishay’s

Applications Engineering Department.

⎝

R₁+ R₂

2. The VHD200 is available in any required ratio between the

resistance values of 100 Ω and 20 kΩ, such that R₁can be any

value between 100 Ω and 20 kΩ and R₂can also be any value

between 100 Ω and 20 kΩ.

3. Power is proportional to the divider ratio.

Example: In a VHD144 (1K/10K dual), the power rating would be

18 mW on the 1K and 182 mW on the 10K, for a total of 200 mW

on R₁+ R₂.

4. For power rating of values below 10K, contact the applications

engineering department.

5. Any value from 100 Ω to 20 kΩ inclusive is available with some

derating of power.

6. Maximum voltage is 200 V.

* Pb containing terminations are not RoHS compliant, exemptions may apply

Document Number: 63036

Revision: 23-Mar-10

For any questions, contact: foil@vishaypg.com

www.foilresistors.com

12 3 4 5

中文翻译

下载PDF

与VHD14419K4/9K7TCR2ASB相关器件

型号	品牌	获取价格	描述	数据表
VHD14419K4/9K7TCR2VTB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 19400ohm, 200V, 0.005% +/-Tol, -2,2ppm/Cel, 4
VHD1442K/18KTCR2FTB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 2000ohm, 200V, 1% +/-Tol, -2,2ppm/Cel, 4019,
VHD144511R/16K2TCR2TBB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 511ohm, 200V, 0.01% +/-Tol, -2,2ppm/Cel, 4019
VHD1445K5/7K7TCR2FBB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 5500ohm, 200V, 1% +/-Tol, -2,2ppm/Cel, 4019,
VHD1446K/7KTCR2BTB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 6000ohm, 200V, 0.1% +/-Tol, -2,2ppm/Cel, 4019
VHD144T20K/20KTCR2AQB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 20000ohm, 200V, 0.05% +/-Tol, -2,2ppm/Cel, 40
VHD144T20K/20KTCR2VAB	VISHAY	获取价格	Array/Network Resistor, Divider, Metal Foil, 20000ohm, 200V, 0.005% +/-Tol, -2,2ppm/Cel, 4
VHD144T20KTCR2AAB		获取价格	Bulk Metal® Foil Hermetically sealed, Small P
VHD144T20KTCR2ABB		获取价格	Bulk Metal® Foil Hermetically sealed, Small P
VHD144T20KTCR2ADB		获取价格	Bulk Metal® Foil Hermetically sealed, Small P

与VHD14419K4/9K7TCR2ASB相关文章

解析光耦仿真器：升级光耦合器技术的必要性
2024-11-18

24
英伟达新一代Blackwell GPU过热问题致交付延迟
2024-11-18

16
国产厂商思特威CMOS图像传感器芯片单月出货超1亿颗，技术创新引领行业发展
2024-11-14

48
台积电5nm和3nm产能利用率达100%，半导体行业景气度持续攀升
2024-11-14

46

产品中心

服务支持

精选活动

关于我们

帮助中心

VHD14419K4/9K7TCR2ASB

VHD14419K4/9K7TCR2ASB 数据手册

与VHD14419K4/9K7TCR2ASB相关器件

与VHD14419K4/9K7TCR2ASB相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

VHD14419K4/9K7TCR2ASB

VHD14419K4/9K7TCR2ASB 数据手册

与VHD14419K4/9K7TCR2ASB相关器件

与VHD14419K4/9K7TCR2ASB相关文章

您还可以找

您在本页遇到什么问题？