USB4640/USB4640i
- Memory Stick Pro-HG Duo Format 1.01
- Memory Stick, MS Duo, MS-HS, MS Pro-HG, MS Pro
- Memory Stick Duo 1.10
- xD-Picture Card 1.2
• 8051 8-bit microprocessor
- 60 MHz - single-cycle execution
- 64 KB ROM | 9 KB RAM
• Integrated regulator for 1.8 V core operation
1.2
Software Features
• Hub and flash media reader/writer configuration from a single source: External I2C ROM or external SPI ROM,
where the following features are then available:
- Customizable vendor ID, product ID, and device ID
- 12-hex digits maximum for the serial number string
- 28-character manufacturer ID and product strings for the flash media reader/writer
1.3
OEM Selectable Hub Features
The USB4640/USB4640i provides a default configuration that may be sufficient for most applications following a reset.
The USB4640/USB4640i can instead be configured by an external I2C EEPROM or SPI ROM.
• Compound device support on a port-by-port basis
- a port is permanently hardwired to a downstream USB peripheral device
• Select over-current sensing and port power control on an individual or ganged (all ports together) basis to match
the OEM’s choice of circuit board component selection
• Port power control and over-current detection/delay features
• Configure the delay time for filtering the over-current sense inputs
• Configure the delay time for turning on downstream port power
• Bus-powered or self-powered selection
• Hub port disable or non-removable configurations
• Flexible port mapping and disable sequencing supports multiple platform designs
• Programmable USB differential-pair pin location eases PCB layout by aligning USB signal lines directly to connec-
tors
• Programmable USB signal drive strength recovers USB signal integrity using 4 levels of signal drive strength
• Indicate the maximum current that the 2-port hub consumes
• Indicate the maximum current required for the hub controller
2013-2018 Microchip Technology Inc.
DS00001922B-page 5