ALUMINUM ELECTROLYTIC CAPACITORS
Chip Type, High Reliability.
Low temperature ESR specification.
CJ series
Chip type, high temperature range, for +125°C use.
Added ESR specification after the test at 40°C
–
(φ6.3 sizes provide only for the first stage. )
Applicable to automatic mounting machine using carrier tape.
Adapted to the RoHS directive (2002/95/EC).
aAtdded40E°SCR specification
–
UB
C J
Specifications
Item
Performance Characteristics
Category Temperature Range
Rated Voltage Range
–40 ~ +125°C
10 ~ 50V
10 ~ 470µF
Capacitance Range
Rated
Capacitance Tolerance
Leakage Current
±20% at 120Hz, 20°C
After 1 minute's application of rated voltage, leakage current is not more than 0.03CVor 4(µA) , whichever is greater.
Measurement frequency : 120Hz, Temperature : 20°C
Rated voltage (V)
10
16
25
35
50
tan
δ
tan δ (MAX.)
0.32
0.24
0.21
0.18
0.18
Measurement frequency : 120Hz
Rated voltage (V)
10
12
16
8
25
6
35
4
50
4
Stability at Low Temperature
Impedance ratio
ZT / Z20 (MAX.)
Z–40°C / Z+20°C
Capacitance change
tan δ
Within ±30% of initial value
300% or less of intial specified value
Initial specified value or less
After 2000 hours' application of rated voltage at
125°C, capacitors meet the characteristic
requirements listed at right.
Endurance
Shelf Life
Leakage current
After storing the capacitors under no load at 125°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4
clause 4.1 at 20°C, they will meet the specified value for endurance characteristics listed above.
The capacitors shall be kept on the hot plate maintained at 250°C
Capacitance change
tan δ
Within ±10% of initial value
Initial specified value or less
Initial specified value or less
Resistance to soldering
heat
for 30 seconds. After removing from the hot plate and restored
at room temperature, they meet the characteristic requirements
listed at right.
Leakage current
Marking
Black print on the case top.
Type numbering system (Example : 10V 100 F)
µ
Chip Type
(φ6.3 × 8.7)
(φ8 × 10, φ10 × 10)
Dimensions
V
Code
10
16
25
35
1V
50
1H
Cap.(µF)
10
1A
1C
1E
100
220
330
470
101
221
331
471
6.3 × 8.7 14
-
-
-
-
95
6.3 × 8.7 14
-
-
95
95
6.3 × 8.7 14
6.3 × 8.7 14
-
-
-
6.0
4.5
4.5
95 6.3 × 8.7
22
33
14
14
14
95 6.3 × 8.7 14
95
95 10 × 10 1.5 4.5 330
95 6.3 × 8.7
95 6.3 × 8.7
8 × 10 2.0 6.0 200
6.3 × 8.7 14
-
95 6.3 × 8.7 14
47
6.3 × 8.7 14
-
95
8 × 10 2.0 6.0 250
8 × 10
2.0
1.5
1.5
250 10 × 10 1.5 4.5
10 × 10 1.5 4.5 330
100
220
330
470
400
after
8 × 10 2.0 6.0 250 10 × 10 1.5 4.5 400 10 × 10
10 × 10 1.5 4.5 400 10 × 10 1.5 4.5 400 10 × 10
10 × 10 1.5 4.5 400
400 10 × 10
1.5 4.5 400
Case size
Initial torture
test
Rated
ripple
φ D
L
×
400
(mm)
ESR
Max. ESR (Ω) at -40°C 100kHz, Rated Ripple (mArms) at 125°C 100kHz
Frequency coefficient of rated ripple current
Frequency
50 Hz
120 Hz
300 Hz
1 kHz
10 kHz~
1.00
Taping specifications are given in page 24.
Recommended land size, soldering by reflow are given in page 25, 26.
Please refer to page 3 for the minimum order quantity.
Coefficient
0.35
0.50
0.64
0.83
-
CAT.8100V 2
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
