Product Features
Features
Characteristic
Remote Sense
Active Current Sharing
ORing Diode
500mV compensation
Single Wire; 5% tolerance if outputs are over 25% of rated load
Optional on all models (not available on 5V model)
125% of nominal (+7.5%)
OVP
Thermal Shutdown
DC OK Signal
Automatic Restart
Logic “1” when output is within +3% of nominal
Transition to Logic “0” at least 5msec before loss of output regulation
Logic “0” applied will inhibit output (referenced to –Sense terminal)
Power Fail Warning Signal
Remote Inhibit
Product Compliances
Approval
UL and cUL
VDE
Characteristic
UL1950, 3rd Edition (1)
EN60950
FCC
Class A requirements for conducted emissions
Class A requirements for conducted emissions
Electrostatic Discharge, Level 4
Electrical Fast Transients, Level 3
Input Surge Immunity, Level 3
Harmonic Currents, Class A
Low Voltage Directive
CISPR 22
EN61000-4-2
EN61000-4-4
EN61000-4-5
EN61000-3-2
CE Mark
Notes: (1) UL1950, 3rd Edition incorporates the requirements of CSA 1950.
Ordering Information
Model Designation
TX1000
BASE MODEL
Chassis: “5” = 5” x 4.88” x 12”; “M” = modified
Output Voltage: See Chart below
Input Filter: “A” designates Class A EMI filter
Fan: “S” designates Standard Fan
Remote Inhibit: “L” designates that Logic “0” applied inhibits output
“P” designates Active Input Power Factor Correction with widerange input voltage of 90-264 VAC
Power Fail Warning: “L” designates transition to Logic “0” upon loss of AC
Output ORing diode: “N” = None; “D” = Diode Option
DC OK: “H” designates that Logic “1” indicates a DC OK condition
OUTPUT VOLTAGES
A = 5V
G = 36V
H = 48V
J = 20V
K = 3.3V
L = 2.5V
B = 12V
C = 15V
D = 18V
E = 24V
F = 28V
The information provided herein is believed to be reliable; however, C&D TECHNOLOGIES assumes no responsibility for inaccuracies or omissions. C&D TECHNOLOGIES assumes
no responsibility for the use of this information, and all use of such information shall be entirely at the user’s own risk. Prices and specifications are subject to change without notice.
No patent rights or licenses to any of the circuits described herein are implied or granted to any third party. C&D TECHNOLOGIESdoes not authorize or warrant any C&D TECHNOLOGIES
product for use in life support devices/systems or in aircraft control applications.
Page 3
TX1000 2/2000 REV C