TWR A-Series
www.murata-ps.com
12-15W, Triple Output DC-DC Converters
Featuring Murata Power Solutions' ultra-wide, 18-72V, input voltage
range, this Family of A-Series, TWR (triple-output) DC-DC converters
deliver up to 15 Watts.
PRODUCT OVERVIEW
Typical units
These devices each have a primary +5V output
that can source from 1 Amp to 1.5 Amps (model
dependent) and auxiliary 12ꢀ15V outputs that can
source from 15ꢁ to 25ꢁmA (model dependent).
All models can simultaneously source maximum
rated current from both primary and auxiliary
outputs. The nominal input voltage for each model
is 48V.
qualification program that includes HALT (Highly-
Accelerated Life Testing), which is designed to
detect any potential electrical, mechanical or proc-
ess weakness.
Packaged in standard, 2" x 2" x ꢁ.45", shielded
metal cases with non-conductive coatings, these
fully isolated (1ꢁꢁꢁVdc minimum) DC-DC’s offer
excellent line and load regulation. Additionally,
these A-Series triples have non-latching output
current limiting, input overvoltage shutdown, input
reverse-polarity protection, and output overvoltage
clamping to protect both the power converters and
their loads. All A-Series TWR models are fully EMI
characterized and designed to meet UL195ꢁ, IEC
95ꢁ, CSA 95ꢁ and EN6ꢁ95ꢁ.
FEATURES
As members of Murata Power Solutions’ new
A-Series, the 12-15W triples exhibit both low cost
and outstanding long-term reliability. Their design
combines straightforward circuit topologies, proven
SMT-on-pcb construction methods, the newest
components, and highly repeatable automatic-
assembly techniques. The A-Series TWR’s superior
durability is substantiated by a rigorous in-house
Low cost! Highly Reliable!
Output voltages: +5Vꢀ 12V or +5Vꢀ 15V
Ultra-wide, 18-72V, input voltage ranges
Small, 2" x 2" x ꢁ.45" packages
Guaranteed efficiencies to 8ꢁ%
Fully isolated, 15ꢁꢁVdc guaranteed
–4ꢁ to +1ꢁꢁ°C operating temperature
Proven SMT-on-pcb construction
Shielded (5-side) metal cases with insulated
baseplates
Designed to meet UL 195ꢁ and EN6ꢁ95ꢁ
SIMPLIFIED SCHEMATIC
Qual Tested; HALT tested; EMC tested
Modifications and customs for OEM's
+5V
(6)
+V
IN
(1)
–12V (–15V)
(8)
–
V
(2)
IN
+12V (+15V)
(5)
PWM
CONTROLLER
COMMON
(7)
OPTO
ERROR
FEEDBACK
AMPLIFIER
Typical topography is shown.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_TWR12-15.C02 Page 1 of 5