TS39100/1/2/3
1.0A Ultra Low Dropout Positive Voltage Regulator
Low Dropout Voltage 0.4V (typ.)
Enable Input Control
Adjustable Output
Error Flag Detection
General Description
The TS39100/1/2/3 series are 1A ultra low dropout linear voltage regulators that provide low voltage, high current output
from an extremely small package. These regulator offers extremely low dropout (typically 400mV at 1A) and very low
ground current (typically 12mA at 1A).
The TS39100/1/2/3 series are fully protected against over current faults, reversed input polarity, reversed lead insertion,
over temperature operation, positive and negative transient voltage spikes, logic level enable control and error flag which
signals whenever the output falls out of regulation.
On the TS39101/2/3, the enable pin may be tied to Vin if it is not required for enable control. This series are offered in
3-pin SOT-223 (TS39100), 8-pin SOP (TS39101/2) and 5-pin TO-252 (TS39103) package.
Features
Ordering Information
Dropout voltage typically 0.4V @Io=1.0A
Part No.
Operating Temp.
Package
Output current up to 1.0A
(Junction)
Low ground current
TS39100CWxx
TS39100CPxx
TS39101CSxx
TS39102CS
SOT-223
TO-252
Output voltage trimmed before assembly
Extremely fast transient response
Reversed leakage protection
Reverse battery protection
-40 ~ +125 oC
SOP-8
TS39103CP5xx
TO-252-5L
Error flag signals output out of regulation
Internal current limit
Note: Where xx denotes voltage option, available are
5.0V, 3.3V, 2.5V, 1.8V and 1.5V. Leave blank for
adjustable version (only TS39103). Contact to
factory for addition output voltage option.
Thermal shutdown protection
Applications
Battery power equipment
High efficiency linear power supplies
High efficiency post regulator for switching supply
Low-voltage microcontrollers and digital logic
SMPS post regulator
LDO linear regulator for PC add-in cards
PowerPCTM power supplies
Multimedia and PC processor supplies
Absolute Maximum Rating (Note 1)
Supply Voltage
Vin
Ven
TSTG
-20V ~ +20
+20
V
V
Enable Voltage
Storage Temperature Range
Lead Soldering Temperature (260 oC)
ESD
-65 ~ +150
5
oC
S
(Note 3)
TS39100/1/2/3
1-10
2004/06 rev. E