TPS61080
TPS61081
www.ti.com
SLVS644B–FEBRUARY 2006–REVISED JANUARY 2007
HIGH VOLTAGE DC/DC BOOST CONVERTER WITH 0.5-A/1.3-A INTEGRATED SWITCH
FEATURES
DESCRIPTION
•
•
•
2.5-V to 6-V Input Voltage Range
The TPS61080/1 is
a
1.2MHz/600kHz fixed
frequency boost regulator designed for high
integration, which integrates a power switch, an
input/output isolation switch and a power diode.
When a short circuit condition is detected, the
isolation switch opens up to disconnect the output
from the input. As a result, the IC protects itself and
the input source from any pin, except VIN, from
being shorted to ground. The isolation switch also
disconnects the output from input during shutdown to
prevent any leakage current. Other provisions for
protection include 0.5A/1.3A peak-to-peak over
current protection, programmable soft start (SS),
over voltage protection (OVP), thermal shutdown and
under voltage lockout (UVLO).
Up to 27-V Output Voltage
0.5-A Integrated Switch (TPS61080)
1.3-A Integrated Switch (TPS61081)
•
12 V/400 mA and 24 V/170 mA From 5-V Input
(TYP)
•
•
Integrated Power Diode
1.2-MHz/600-kHz Selectable Fixed Switching
Frequency
•
•
•
•
•
•
Input to Output Isolation
Short-Circuit Protection
Programmable Soft Start
Overvoltage Protection
Up to 87% Efficiency
The IC operates from input supplies including single
Li-ion battery, triple NiMH, and regulated 5V, such as
USB output. The output can be boosted up to 27V.
TPS61080/1 can provide the supply voltages of
OLED, TFT-LCD bias, 12V and 24V power rails. The
output of TPS61080/1 can also be configured as a
current source to power up to 7 WLED in flash light
applications.
10-Pin 3 mm×3 mm QFN Package
APPLICATIONS
•
3.3V to 12V, 5V to 12V and 24V Boost
Converter
White LED Backlight for Media Form Factor
Display
OLED Power Supply
xDSL Applications
•
ORDERING INFORMATION
•
•
•
•
TA
OVERCURRENT
LIMIT
PACKAGE
PACKAGE
MARKING
TFT-LCD Bias Supply
White LED Flash Light
0.5A(min)
1.3A(min)
0.5A(min)
1.3A(min)
TPS61080DRCR
TPS61081DRCR
TPS61080DRCT
TPS61081DRCT
BCN
BCO
BCN
BCO
–40°C
to 85°C
TYPICAL APPLICATION
TOP VIEW
TPS61081
L1 4.7 µH
L
VIN
SS
SW
Vin 5V
SW
VIN
EN
L
OUT
PGND
FSW
EN
12 V/250 mA
V
O
Thermal
Pad
OUT
C1
R3
100 Ω
C3
33pF
R1
FSW
4.7 mF
GND
FB
437 kW
FB
SS
4.7 µF
Cs
47 nF
PGND
GND
R2
49.9 kW
10-PIN 3mm x 3mm x 1mm QFN
L1: TDK VLCF5020T-4R7N1R7-1
C1: Murata GRM188R60J105K
C2: Murata GRM219R61C475K
C3: Feed forward capacitor for stability
R3: Noise decoupling resistor
Cs: Soft start programming capacitor
Figure 1. 5V to 12V, 250mA Step-Up DC/DC
Converter
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PowerPAD is a trademark of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Copyright © 2006–2007, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.