TPS53219
www.ti.com
SLUSAA8 –NOVEMBER 2010
Wide Input Voltage, Eco-mode™, Single Synchronous Step-Down Controller
Check for Samples: TPS53219
1
FEATURES
APPLICATIONS
•
Point-of-Load Systems
2
•
Wide Input Voltage Range: 4.5 V to 28 V
Output Voltage Range: 0.6 V to 5.5 V
Wide Output Load Range: 0 A to > 20 A
Built-In 0.6-V Reference
–
–
–
–
Storage Computer
Server Computer
Multi-Function Printer
Embedded Computing
•
•
•
•
•
Built-In LDO Linear Voltage Regulator
Auto-Skip Eco-mode™ for Light-Load
Efficiency
DESCRIPTION
The TPS53219 is small-sized single buck controller
with adaptive on-time D-CAP™ mode control. The
device is suitable for low output voltage, high current,
PC system power rail and similar point-of-load (POL)
power supplies in digital consumer products. The
small package and minimal pin-count save space on
the PCB, while the dedicated EN pin and pre-set
frequency selections simplify the power supply
design. The skip-mode at light load conditions, strong
gate drivers and low-side FET RDS(on) current sensing
supports low-loss and high efficiency, over a broad
load range. The conversion input voltage (high-side
FET drain voltage) range is between 3 V and 28 V,
and the output voltage range is between 0.6 V and
5.5 V. The TPS53219 is available in a 16-pin, QFN
package specified from –40°C to 85°C.
•
•
D-CAP™ Mode with 100-ns Load-Step
Response
Adaptive On-Time Control Architecture with 8
Selectable Frequency Settings
•
•
4700ppm/°C RDS(on) Current Sensing
0.7-ms, 1.4-ms, 2.8-ms and 5.6-ms Selectable
Internal Voltage Servo Soft-Start
•
•
•
•
•
•
•
Pre-Charged Start-up Capability
Built-In Output Discharge
Power Good Output
Integrated Boost Switch
Built-in OVP/UVP/OCP
Thermal Shutdown (Non-latch)
3 mm × 3mm QFN, 16-Pin (RGT) Package
V
OUT
V
IN
VREG
VIN
VIN
SW
SW
SW
BG
CSD86350
16
15
14
13
PGOOD NC VBST DRVH
SW 12
1
TRIP
DRVL 11
VDRV 10
TG
2
3
4
EN
TPS53219
EN
VFB
RF
TGR
VREG
9
MODE VDD
GND PGND
PGND
5
6
7
8
UDG-10100
VDD
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas
Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
2
Eco-mode, D-CAP are trademarks of Texas Instruments.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
Copyright © 2010, Texas Instruments Incorporated