TPS22930
www.ti.com
SLVSBL3 –NOVEMBER 2012
ULTRA SMALL, LOW RESISTANCE LOAD SWITCH
Check for Samples: TPS22930
1
FEATURES
DESCRIPTION
The TPS22930 is a small, low RON load switch with
controlled turn on. The device contains a P-channel
MOSFET that can operate over an input voltage
range of 1.4V to 5.5V. The switch is controlled by an
on/off input (ON), which is capable of interfacing
directly with low-voltage control signals. The
TPS22930 is active high enable.
•
•
Integrated Single Channel Load Switch
Ultra Small CSP-4 Package (0.9mm × 0.9mm,
0.5mm pitch)
•
•
Input Voltage Range: 1.4V to 5.5V
Ultra Low RON Resistance
–
–
–
RON = 35mΩ at VIN = 5V
RON = 36mΩ at VIN = 3.6V
RON = 49mΩ at VIN = 1.8V
The TPS22930 device provides circuit breaker
functionality by disabling the body diode during
reverse voltage (also known as reverse current)
situations. Reverse current protection is active only
when the power-switch is disabled (off). The device
disengages the body diode when the output voltage
(VOUT) is driven higher than the input (VIN) to stop the
flow of current towards the input side of the switch.
Additionally, under-voltage lockout (UVLO) protection
turns the switch off if the input voltage is too low.
•
•
•
2A Maximum Continuous Switch Current
Low Quiescent Current (< 3µA)
Low Control Input Threshold Enables Use of
1.2V/1.8V/2.5V/3.3V Logic
•
•
•
Controlled Slew Rate
Under Voltage Lockout
The slew rate of the device is internally controlled in
order to avoid inrush current.
Reverse Current Protection When Disabled
APPLICATIONS
The TPS22930 is available in an ultra-small, space-
saving 4-pin CSP package and is characterized for
operation over the free-air temperature range of
–40°C to 85°C.
•
•
•
•
•
•
•
Smartphone / Wireless Handsets
Portable Industrial / Medical Equipment
Portable Media Players
VIN
VOUT
Power
Supply
Point of Sales Terminals
GPS Navigation Devices
Digital Cameras
OFF
CIN
ON
CL
RL
ON
GND
TPS22930
Portable Instrumentation
GND
Figure 1. Typical Application
Feature List
RON (typ) at
4.2V
Rise Time at
4.2V (typ)
Quick Output
Discharge(1)
Maximum
Continuous Current
Device
Enable
TPS22930A
35mΩ
5.4µs
No
2A
Active High
(1) This feature discharges output of the switch to GND through a resistor, preventing the output from floating when the pass FET is
disabled
1
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
PRODUCTION DATA information is current as of publication date.
Copyright © 2012, Texas Instruments Incorporated
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.