WDM & Optical Transport
Datasheet
LambdaDriver
®
–10Gbps Transponder with FEC (TM-6DXFPF)
Forward Error Correction for distance extension
Features
10 Gbps OC192/STM-64 or GE data rates
Full 3R support
G.709 performance monitoring
Line and Diagnostics Loop-back tests
100GHz ITU-T grid (G.694.1) wavelengths for DWDM
Dispersion tolerance up to 200Km
Power monitoring
XFP digital diagnostics
Link Integrity notification (LIN)
Hot swappable
Applications
10 GE or SDH/SONET signal regeneration and optical
wavelength conversion
DWDM networks with end-to-end performance monitoring
Distance extention of existing 10 Gbps DWDM networks
TM-6DXFPF/xx
Overview
The TM-6DXFPF 10Gbps with Forward Error Correction (FEC)
transponders are single long slot modules usable in the LD1600, Standard performance monitoring is supported for end-to-end
LD1600L and LD400L LambdaDriver chassis, that convert the SONET/SDH terminated signals providing at each receive side the
“gray” wavelength of a 10 Gbps terminal equipment interface relevant conditions and alarms as per ITU G.783, GR-474 standard
to ITU-T grid DWDM wavelength enabling its transport via the definitions. Statistics for current 15 minutes interval and up to 96
LambdaDriver®
Optical Transport System (DWDM multiplexer, previous intervals can be viewed.
OADM etc.).
For 10GE traffic, performance parameters as defined by the
RFC 2819 (RMON), MIB2 and IfMib extensions are supported.
The TM-6DXFPF modules support OC-192/STM-64 and 10 GE In addition, the extensive information provided by the G.709
protocols with 3R signal conditioning.
monitoring allows for detailed performance analysis such as BER,
statistics, etc.
A key feature of the modules is the support of the G.709 FEC
standard protocol as well as Enhanced FEC (EFEC) protocol with Line and Diagnostic Loop-back functionality is supported and
better error correction performance. The FEC/EFEC mode is user provides an essential tool for troubleshooting and maintenance
selectable via management and set to EFEC by default.
The error-correction performance significantly extends the overall checks the integrity of the internal ports circuitry while the Line
distance reach of the link for very low BER performance. loop-back is used to check the fiber connections integrity. The
For 10GE and OC192/STM-64 the G.709 digital wrapper Line Loop-back and the Diagnostic Loop-back are available for
operations in a live network. The Diagnostic loop-back function
technology is used to transparently pass any type of payload.
Access (Client) ports.
ꢇꢈꢉꢊ ꢅꢋꢌ
ꢍꢉꢇꢋ
ꢎꢏ
ꢍꢉꢇꢋ
ꢎꢏ
ꢐ�ꢀꢂꢑ
ꢐ�ꢀꢂꢑ
�ꢀꢁꢂꢃꢄꢅꢆꢅ
�ꢀꢁꢂꢃꢄꢅꢆꢅ
Not sure what solution best fits your needs? Visit www.mrv.com or e-mail us at sales@mrv.com