The TAP1000 Series deliv-
ers 1000 watts of continuous
power when properly mounted
to a liquid cooled heat sink
(based on 70°C ambient tem-
perature)
Applications include power
conditioning, power distribu-
tion, power conversion, and
power control.
S P E C I F I C A T I O N S
Material
Resistor Element: Thick Film on
Alumina Substrate
TAP1000 Series
1000 Watt Heat Sinkable Planar
Electrical
Power Rating: 1000 watt @ 70°C
Mounting Plate
Resistance Values: 2.5Ω to 50Ω
Resistance Tolerance: +10% std.
Max Operating Voltage:
2000VDC
Temperature Coefficient:
± 250 PPM/°C
Dielectric Strength: 6KV
Standard, up to 12KV available
Operating Temperature Range:
-55°C to 150°C
0.193"
(4.89mm)
0.689"
ø0.172"
(4.37mm)
(17.50mm)
ø10-32
F E A T U R E S
1.308"
(33.21mm)
• Dissipates 1000 Watts @ 70°C
Mounting Plate Temperature
• High Energy Rating
• Low Inductance
• Resistor Element Electrically
Isolated
1.622"
(41.20mm)
3.000"
(76.20mm)
1.308"
(33.21mm)
• High Dielectric Strength
• Small Footprint
Case
Terminal Screws: #10-32
Max Contacts Torque: 10 in-lb
Mounting Screws: #8-32
Max Mounting Torque: 15 in-lb
Creepage Distance:
50mm ± 1mm (min)
A P P L I C A T I O N S
• Power semiconductor balancing
• Motor control
• Inrush Current Limiting
(same dimensions)
0.300"
(7.62mm)
0.450"
(11.43mm)
Thermal Resistance:
0.05°C / Watt
0.798"
(20.26mm)
0.188"
(4.76mm)
D E R A T I N G C U R V E
100
80
60
40
20
0
P E R F O R M A N C E D ATA
Test
Rating
Continuous
Pulse
Rated Power, max. current and
heat sink plate temperature limited
1000W
Operating Voltage
√P*R
223V
N/A
Max. Applied Voltage, ohms law limited
Max. Current
2000VDC
53.33A
10A
0
25
50 70
100 125 150
Critical Resistance; below this resistance max power
has to be de-rated due to exceeding max current
10 ohms
Ambient Temperature, °C
A P P L I C A T I O N N O T E S
Proper heat sinking techniques are essential to performance of a
TAP1000 resistor. Pleased follow these guidelines when designing
TAP1000 system:
• Heat sink compound must always be used. Phase change material is
preferred over silicon pastes.
• Heats sink plate (base plate of the resistor) temperature must be
monitored to establish proper de-rating. Best technique is to attach a
thermocouple to the side of the base plate of the resistor. Temperature
of plastic housing or heat sink cannot be used to establish rating of the
resistor. Usage of laser thermometers should be avoided.
• Due to very high power density, only liquid cooled heat sinks are rec-
ommended for applications when >300W power rating is desired.
• Properly designed heat sink should have more than 2 cooling pipes
under the surface of the TAP1000 resistor. Hydroblok-1000, a 4 pass
aluminum heat sink (http://www.d6industries.com/HeatSinks.htm) is an
example of properly designed heat sink.
Test
Method
Maximum ΔR
Max % ΔRsto = ±(2% + 0.05Ω)
Short Time Overload
Moisture Resistance
Thermal Shock
Vibration, elec.
Vibration, mech.
Load Life, 1000 Hrs
Pulse Tolerance
20,000 Pulses
Dielectric Strength
1.14 x √P*R / 10 sec @ 70°C
1000 hrs @ 40°C, 90-95% RH
MIL-STD-202, Method 107
MIL-STD-202, Method 201
MIL-STD-202, Method 201
90 min ON / 30 min OFF
≤1%
MIL-STD-202, Method 107
±2% Resistance
No Loose Terminal Screws
≤1%
52µF @ 2KV / 60 sec intervals, 104J
≤1%
6KVDC for 1 minute
≤1%
O R D E R I N G I N F O R M AT I O N
RoHS Compliant
T A 1 K 0 P H 2 R 5 0 K E
S TA N D A R D P A R T N U M B E R S F O R TA P 1 0 0 0 S E R I E S
Style
Package Resistance
Tolerance
K = 10% (standard)
L = 20%
Type
2.5Ω = 2R50
50Ω = 50R0
Part Number
Part Number
10% Tolerance
Ohms
10% Tolerance
Ohms
3
4
TA1K0PH3R00KE
TA1K0PH4R00KE
TA1K0PH5R00KE
TA1K0PH8R00KE
TA1K0PH10R0KE
15
20
25
30
50
TA1K0PH15R0KE
TA1K0PH20R0KE
TA1K0PH25R0KE
TA1K0PH30R0KE
TA1K0PH50R0KE
Check product availability at www.ohmite.com
5
8
10
66
Ohmite Mfg. Co. 1600 Golf Rd., Rolling Meadows, IL 60008 • 1-866-9-OHMITE • Int’l 1-847-258-0300 • Fax 1-847-574-7522 • www.ohmite.com • info@ohmite.com