ECL Pro™
ECSLY1P0r0oE™P56V
SY100EP56V
3.3V/5V PECL/ECL 3GHz
DUAL DIFFERENTIAL
2:1 MULTIPLEXER
Micrel, Inc.
FEATURES
■ Dual, fully differential 2:1 PECL/ECL multiplexer
■ Guaranteed AC parameters over temperature/
ECL Pro™
voltage:
• > 3GHz f
(toggle)
MAX
• < 100ps within device skew
• < 230ps rise/fall times
DESCRIPTION
• < 500ps propagation delay
The SY100EP56V is a high-speed, low-skew, fully
differential Dual PECL/ECL 2:1 multiplexer. This device is a
pin-for-pin, plug-in replacement to the MC10/100EP56DT.
Two separate 2:1 multiplexers (Channel 0 and Channel 1)
with dedicated select control pins (SEL0 and SEL1) are
implemented in a 20-pin TSSOP package. The signal-path
inputs (D0a, D0b and D1a, D1b) accept differential signals
as low as 150mV pk-pk. For applications that require
common select control for both channels A & B, a common
select pin (COM_SEL) is available. All I/O pins are 100k
PECL/ECL logic compatible.
■ Flexible power supply: 3.0V to 5.5V
■ Wide operating temperature range: –40°C to +85°C
■ V reference for AC-coupled and single-ended
BB
applications
■ Both channels have independent input select or
common select control
■ 100k PECL/ECL compatible logic
■ Available in 20-pin TSSOP package
AC–performance is guaranteed over the industrial –40°C
to +85°C temperature range and 3.0V to 5.5V supply voltage
range. This device will operate in PECL/LVPECL or ECL/
LVECL mode. The 500ps max (400 typ) propagation delay
CROSS REFERENCE TABLE
is matched for all signal and logic select paths: D-to-Q
,
OUT
SEL-to-Q
, and COM_SEL-to-Q
. Two V
output
Micrel Semiconductor
SY100EP56VK4I
ON Semiconductor
MC100EP56DT
OUT
OUT
BB
reference pins (approx equal to V –1.4V) are available
for AC–coupled or single-ended applications.
CC
SY100EP56VK4ITR
MC100EP56DTR2
The SY100EP56V is part of Micrel’s high-speed, Precision
Edge timing and distribution family. For applications that
require a different I/O combination, consult the Micrel website
at www.micrel.com, and choose from a comprehensive
product line of high-speed, low skew fanout buffers,
translators, and clock dividers.
MUX SELECT TRUTH TABLE
SEL0
SEL1
COM_SEL
Q0, /Q0
Q1, /Q1
X
L
X
L
H
L
L
L
L
a
b
b
a
a
a
b
a
a
b
L
H
H
L
H
H
ECL Pro is a trademark of Micrel, Inc.
Rev.: D
Amendment: /0
M9999-120505
hbwhelp@micrel.com or (408) 955-1690
1
Issue Date: December 2005