SPM-32A/-33A/-34A/-35A/-36A SELECTIVE LEVEL METERS
3
Specifications
Inputs
Input
Selective
Wideband
Frequency range
SPM-32A
Coaxial 75 Ω
< –120(1) to +20 dBm
< –105(1) to +20 dBm
< –110(1) to +10 dBm
< 8 µV(1) to 3.8 V
< –50 to +20 dBm
< –50 to +20 dBm
< –60 to +10 dBm
1 µV to 3.8 V
50 Hz to 620 kHz
50 Hz to 2 MHz
50 Hz to 3.5 MHz
Balanced 75 Ω to 150 Ω
Balanced 600 Ω
Voltage
(1) For a bandwidth of 25 Hz, f ≥10 kHz; bal. 75 Ω : –100 dBm
SPM-33A/-34A/-35A
SPM-36A
Coaxial input
Versacon 9 Universal Connector (Fitted with the Versacon 9
Error limits of the level display
75 Ω basic connector and BNC insert.
Other types of insert – see Versacon data sheet
– should be ordered with the device.)
For Zin= Zout= Z0, after calibration, with noise averaging, MAX. HOLD off, battery mode, includes rounding errors
Input impedance, selectable
75 Ω, high impedance
Intrinsic error and variation with level at 10 kHz and (23 3ꢀ ꢁC (table values in dBꢀ
Balanced input
Bal., all bandwidths
Connectors
Normally CF but see ordering information
0.ꢀ
0.ꢂ
0.ꢀ
–
Input impedance, selectable
75 Ω, 150 Ω*, 600 Ω,
high impedance
Bandwidths > 100 Hz
Coaxial 100 Hz bandwidth
25 Hz bandwidth
*135 Ω for BN 4033/02, /12 and /37
0.ꢀ
0.ꢁ
Signal balance ratio to ITU-T O.9
f ≤620 kHz,
signal balance ≥40 dB
0.3
0.1
0.3
Frequency
Level range/dBm
(75, 135, 150 Ω)
Level range/dBm, dB
(ꢁ00 Ω)
+20
+20
0
0
–70
–80
–80
–ꢂ0
–ꢂ0
–100
–110
Frequency setting
Numeric via keypad, in steps, resolution
Quasi-analog with up/down keys
Automatic search (adjustable threshold)
AFC
–100
1 Hz
Variation of level display with frequency
referred to 10 kHz, the input level being ≥40 dB above the intrinsic noise level (table values in dB)
Frequency display
LCD, 7 digits
3 ppm of set frequency
1 Hz
Error limits for tuning frequency
Coaxial
Z0 = ꢀ5 Ω
0.3
0.5
0.6
0.ꢀ
0.ꢁ
Level and Voltage Measurements
Z0 = ꢀ5
0.6
0.3
0.ꢂ
0.5
0.6
0.6
0.ꢀ
0.ꢀ
0.ꢃ
0.ꢁ
1.0
Balanced to 150 Ω
Level display
Digital display, max. resolution
Quasi-analog bargraph detects signal trends
Display range
0.01 dB
Balanced Z0 = 600 Ω
Intrinsic spurious noise up to max. test level (dBm), battery
power
Frequency range
50 Hz
100 Hz
620 kHz
1.62 MHz
2 MHz
3 MHz
3.5 MHz
Bandwidth selectable
Nominal value
25 Hz; 1.74 (1.95)* kHz; 3.1 kHz *BN 4033/02, /12, /37
>60 dB
Harmonic ratio ak2, ak3, for level ≤ –10 dBm
For fundamentals ≥2 kHz
Demodulator
Single sideband demodulation
Memory
Integral loudspeaker, volume adjustable
100 user-programmable setups, 100 results
Storage of