SN8F2270B Series
USB 2.0 Low-Speed 8-Bit Micro-Controller
1
PRODUCT OVERVIEW
1.1 FEATURES
Memory configuration
7 interrupt sources.
♦
♦
Flash ROM size: 5K x 16 bits, including in system
programming function and EEPROM enumeration.
20000 erase/write cycles.
Five internal interrupts: T0, TC0, USB, SPI, Wakeup
Two external interrupt: INT0, INT1.
RAM size: 192 x 8 bits.
8 levels stack buffer
One SIO function for data transfer
♦
♦
♦
♦
I/O pin configuration
Two 8 bits timer counter (T0, TC0)
TC0 has 8 bit PWM function (duty/cycle
programmable).
Bi-directional: P0, P1, P5
Wake-up: P0/P1 level change.
Pull-up resistors: P0, P1, P5.
External interrupt: P0.0, P0.1 controlled by
PEDGE.
Two system clocks.
Internal low clock: RC type 24KHz which Fosc =
24KHz.
♦
♦
Internal High clock: Fosc = 6MHz.
Low Speed USB 2.0
♦
Conforms to USB specification, Version 2.0.
3.3V regulator output for USB D- pin internal
1.5k ohm pull-up resistor.
Four operating modes.
Normal mode: Both high and low clocks active.
Slow mode: Low clock only.
Integrated USB transceiver.
Supports 1 low speed USB device address,
1 control endpoint
Sleep: Both high and low clocks stop.
Green mode: Periodical wakeup by timer.
2 interrupt IN/OUT endpoints, each has 8 bytes
FIFO
Package
♦
SOP14, QFN16, SOP20, SSOP20, DIP20
Powerful instructions
On chip watchdog timer.
♦
♦
♦
One clocks per instruction cycle (1T)
Most of instructions are one cycle only.
All ROM area JMP instruction.
In-system re-programmability
Allows easy firmware update
All ROM area CALL address instruction.
All ROM area lookup table function (MOVC)
)
Features Selection Table
TIMER
WAKE-UP
PIN NO.
CHIP
ROM RAM STACK
SIO PWM
I/O pin
PACKAGE
T0 TC0
SN8F2271B 5K*16 192*8
SN8F22711B 5K*16 192*8
SN8F22721B 5K*16 192*8
8
8
8
V
V
V
V
V
V
V
-
V
-
V
V
7
7
10
10
8
14
QFN
SOP
DIP/SOP/SSOP
SONiX TECHNOLOGY CO., LTD
Page 7
Version 1.2