SUMMIT
MICROELECTRONICS, Inc.
SMH4811A
Preliminary
Programmable Distributed Power Hot-Swap Controller
for High-Availability Systems
FEATURES
z Programmable Host Voltage Fault Monitoring
Programmable Under-Voltage Hysteresis
Programmable UV/OV Voltage Filter
z Soft Starts Main Power Supply on Card Insertion
or System Power Up
z Senses Card Insertion via Short Pins or Ejector
Switches
Programmable Fault Mode: Latched or Duty
z Master Enable to Allow System Control of
Cycle
Power Up or Down
Can be used as a Temperature Sense Input
z Programmable Forced Shutdown Timer
z 2.5V and 5.0V Reference Outputs
z Programmable Independent Controls of a DC/DC
Converter
Eliminates the Need for Other Primary
Not Enabled until Host Supply Fully Soft
Voltages
Started
Easy Expansion of External Monitor Func-
Programmable Time Delay
tions
Available Input to hold off Dependant En-
z Internal Shunt Regulator Allows a Wide Supply
ables until Conditions are Satisfied
Range
z Highly Programmable Circuit Breaker
Programmable Quick-TripTM Values
Programmable Current Limiting
Programmable Duty Cycle Times
Programmable Over-current Filter
SIMPLIFIED APPLICATION DRAWING
0V
Disable/Enable
ENPG
VDD
Pin Detect
PD1#
FAULT#
PG#
UV
OV
SMH4811A
DC/DC
Pin Detect
PD2#
VSS
CBSENSE VGATE 2.5VREF 5.0VREF
2044 SAD 5.1
–48V
©SUMMIT MICROELECTRONICS, Inc., 2006 •757NorthMaryAve • Sunnyvale, CA94085 • Phone 408-523-1000 • FAX 408-523-1266 • www.summitmicro.com
Characteristics subject to change without notice 2044 6.6 03/27/09
1