SMC Series-AH
Transient Voltage Suppressors
Breakdown Voltage : 12 to 91 V
Peak Pulse Power : 1500 W
Features
• Glass passivated chip
• 1500 W peak pulse power capability with a 10/1000 μs waveform
• Low leakage
• Uni and Bidirectional unit
• Excellent clamping capability
• Very fast response time
• AEC-Q101 is Available
• Halogen and Antimony Free(HAF), RoHS compliant
SMC(DO-214AB)
Mechanical Data
• Case: SMC (DO-214AB) molded plastic
• Epoxy: UL 94V-0 rate flame retardant
• Polarity: Color band denotes cathode end except Bipolar
• Lead: Solderable per MIL-STD-750, method 2026
• Mounting position: Any
Maximum Ratings
O
Ratings at 25 C ambient temperature unless otherwise specified.
Parameter
Symbol
Value
Unit
W
Peak Pulse Power Dissipation with a 10/1000 µs Waveform 1)
Peak Pulse Current with a 10/1000 µs Waveform 1)
Power dissipation on infinite heatsink, at TL = 75 °C
PPPM
IPPM
PD
1500
See Next Table
6.5
A
W
Peak Forward Surge Current, 8.3 ms Single Half Sine-wave
Unidirectional only 2)
IFSM
200
A
Maximum Instantaneous Forward Voltage at 100 A for
Unidirectional only 3)
VF
3.5 / 5
V
Operating Junction and Storage Temperature Range
Tj, Tstg
- 55 to + 150
℃
1)
Non-repetitive current pulse per Fig.5 and derated above Ta = 25 °C per Fig.1.
2)
3)
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
VF < 3.5 V for devices of VBR < 200 V and VF < 5 V for devices of VBR > 201 V.
®
1 / 4
Dated: 18/12/2019 AN Rev: 02