New Product
SMA6J5.0A thru SMA6J28A
Vishay General Semiconductor
Surface Mount Transient Voltage Suppressors
FEATURES
• Low profile package
• Ideal for automated placement
• Available in uni-directional polarity only
• Excellent clamping capability
• Meets MSL level 1, per J-STD-020,
LF maximum peak of 260 °C
• Solder dip 260 °C, 40 s
• Component in accordance to RoHS 2002/95/EC
DO-214AC (SMA)
and WEEE 2002/96/EC
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
PRIMARY CHARACTERISTICS
VWM
5.0 V to 28 V
600 W
4000 W
4 W
P
PPM (10 x 1000 µs)
P
PPM (8 x 20 µs)
MECHANICAL DATA
Case: DO-214AC (SMA)
P
D at TA = 50 °C
IFSM
50 A
Molding compound meets UL 94 V-0 flammability
rating
TJ max.
150 °C
Base P/N-E3 - RoHS compliant, commercial grade
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD22-B102
E3 suffix meets JESD 201 class 1A whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (T = 25 °C unless otherwise noted)
A
PARAMETER
SYMBOL
VALUE
UNIT
with 10/1000 µs waveform (1)(2)
with 8/20 µs waveform
600
4000
Peak pulse power dissipation
PPPM
W
with 10/1000 µs waveform (1)(2)
with 8/20 µs waveform
Peak pulse current
IPPM
See next table
A
Power dissipation on infinite heatsink, TA = 50 °C
Peak forward surge current 8.3 ms single half sine-wave
Operating junction and storage temperature range
PD
IFSM
4.0
50
W
A
TJ, TSTG
- 55 to + 150
°C
Notes:
(1) Non-repetitive current pulse, per Fig. 1 and derated above TA = 25 °C per Fig. 2.
(2) Mounted on P.C.B. with 5.0 x 5.0 mm copper pads attached to each terminal
Document Number: 89115
Revision: 30-Oct-08
For technical questions within your region, please contact one of the following:
PDD-Americas@vishay.com, PDD-Asia@vishay.com, PDD-Europe@vishay.com
www.vishay.com
1