5秒后页面跳转
捷配首页

Datasheet > SiP12108ADMP-T1GE4
SiP12108ADMP-T1GE4 PDF预览

SiP12108ADMP-T1GE4

更新时间： 2024-09-30 01:14:23
品牌 Logo 应用领域
威世 - VISHAY 开关
页数 文件大小 规格书
18页 1671K
描述
Adjustable output voltage down to 0.6 V

阅读下载

中文翻译

获取价格

SiP12108ADMP-T1GE4 技术参数

是否Rohs认证： 符合生命周期：Active
包装说明：HVQCCN,Reach Compliance Code：unknown
ECCN代码：EAR99HTS代码：8542.39.00.01
Factory Lead Time：18 weeks风险等级：5.74
其他特性：ALSO OPERATES IN ADJUSTABLE MODE FROM 0.6 TO 4.675V模拟集成电路 - 其他类型：SWITCHING REGULATOR
控制模式：CURRENT-MODE控制技术：PULSE WIDTH MODULATION
最大输入电压：5.5 V最小输入电压：2.8 V
标称输入电压：3.3 VJESD-30 代码：S-XQCC-N16
长度：3 mm功能数量：1
端子数量：16最高工作温度：85 °C
最低工作温度：-40 °C封装主体材料：UNSPECIFIED
封装代码：HVQCCN封装形状：SQUARE
封装形式：CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE峰值回流温度（摄氏度）：NOT SPECIFIED
座面最大高度：0.95 mm表面贴装：YES
切换器配置：BUCK最大切换频率：4000 kHz
温度等级：INDUSTRIAL端子形式：NO LEAD
端子节距：0.5 mm端子位置：QUAD
处于峰值回流温度下的最长时间：NOT SPECIFIED宽度：3 mm
Base Number Matches：1

SiP12108ADMP-T1GE4 数据手册

 浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第2页浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第3页浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第4页浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第5页浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第6页浏览型号SiP12108ADMP-T1GE4的Datasheet PDF文件第7页 
SiP12108, SiP12108A  
www.vishay.com  
Vishay Siliconix  
2.8 V to 5.5 V Input  
5 A Synchronous Buck Regulator  
DESCRIPTION  
FEATURES  
• 2.8 V to 5.5 V input voltage  
The SiP12108 is a high frequency current-mode constant  
on-time (CM-COT) synchronous buck regulator with  
integrated high-side and low-side power MOSFETs. Its  
power stage is capable of supplying 5 A continuous current  
at 4 MHz switching frequency. This regulator produces an  
adjustable output voltage down to 0.6 V from 2.8 V to 5.5 V  
input rail to accommodate a variety of applications,  
including computing, consumer electronics, telecom, and  
industrial.  
• Adjustable output voltage down to 0.6 V  
• 5 A continuous output current  
• Programmable switching frequency up to 4 MHz  
• 95 % peak efficiency  
• Stable with any capacitor. No external ESR  
network required.  
• Ultrafast transient response  
• Selectable power saving (PSM) mode or forced  
continuous mode  
SiP12108’s CM-COT architecture delivers ultra-fast  
transient response with minimum output capacitance and  
tight ripple regulation at very light load. The part is stable  
with any capacitor type and no ESR network is required for  
loop stability. The device also incorporates a power saving  
scheme that significantly increases light load efficiency.  
•
1 % accuracy of VOUT setting  
• Pulse-by-pulse current limit  
• Scalable with SiP12107 - 3 A  
• SiP12108 is fully protected with OTP, SCP, UVP, OVP  
• SiP12108A is fully protected with OTP, SCP, OVP  
• PGOOD Indicator  
The SiP12108 integrates a full protection feature set,  
including output overvoltage protection (OVP), output under  
voltage protection (UVP) and thermal shutdown (OTP). The  
“A” version of the device, SiP12108A, does not have the  
UVP feature. They also incorporate UVLO for the input rail  
and an internal soft-start ramp.  
• PowerCAD Simulation software available at  
vishay.transim.com/login.aspx  
• Material categorization: For definitions of compliance  
please see www.vishay.com/doc?99912  
The SiP12108 is available in lead (Pb)-free power enhanced  
3 mm x 3 mm QFN-16 package.  
APPLICATIONS  
• Point of load regulation for low-power processors,  
network processors, DSPs, FPGAs, and ASICs  
• Low voltage, distributed power architectures with  
3.3 V or 5 V rails  
• Computing, broadband, networking, LAN/WAN, optical,  
test and measurement  
• A/V, high density cards, storage, DSL, STB, DVR, DTV,  
Industrial PC  
TYPICAL APPLICATION CIRCUIT  
POWER SAVE MODE  
ENABLE  
POWER GOOD  
PGOOD EN AUTO  
VOUT  
INPUT = 2.8 V to 5.5 V  
VIN  
LX  
VOUT  
VFB  
AVIN  
GMO  
RON  
PGND  
AGND  
Fig. 1 - Typical Application Circuit for SiP12108  
S13-2257-Rev. B, 11-Nov-13  
Document Number: 62699  
1
For technical questions, contact: analogswitchtechsupport@vishay.com  
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT  
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000  
1234567...18

中文翻译

下载PDF

与SiP12108ADMP-T1GE4相关器件

型号 品牌 获取价格 描述 数据表
SIP12108DB VISHAY

获取价格

 		Switching Regulator,
SIP12108DMP-T1GE4 VISHAY

获取价格

 		Switching Regulator, Current-mode, 4000kHz Switching Freq-Max, QFN-16
SIP12109 VISHAY

获取价格

 		4 A continuous output current
SiP12109DB VISHAY

获取价格

 		4 A continuous output current
SiP12109DMP-T1-GE4 VISHAY

获取价格

 		4 A continuous output current
SIP12110 VISHAY

获取价格

 		6 A, 4.5 V to 15 V Input Synchronous Buck Regulator
SiP12110DB VISHAY

获取价格

 		6 A, 4.5 V to 15 V Input Synchronous Buck Regulator
SIP12110DMP-T1-GE4 VISHAY

获取价格

 		Switching Regulator,
SIP12116 VISHAY

获取价格

 		3 A Current Mode Constant On-Time Synchronous Buck Regulator
SiP12116DB VISHAY

获取价格

 		3 A Current Mode Constant On-Time Synchronous Buck Regulator

与SiP12108ADMP-T1GE4相关文章

您还可以找


热门产品
PCB打样/小批量
铝基板
BOM智能配单
PCBA制造
钣金
精密CNC
模具注塑
薄膜开关
精选活动
PCBA打样特惠
四六层板品质升级
铝基板品质升级
一体化电子制造
DFM下载
服务支持
企业认证
产品展示
工厂展示
工艺能力
积分商城
关于捷配
捷配简介
企业文化
公司动态
人才招聘
联系我们
帮助中心
下单流程
付款流程
开票流程
常见问题
全球PCB制造服务专线 400-613-0088

工作时间：9:00-21:00

CEO邮箱：ceo@jiepei.com

投诉邮箱：tousu@jiepei.com

捷配网-微信公众号 微信公众号
捷配网-微信公众号 抖音公众号
资质认证：
合作快递：
支付方式：
Copyright © 2024 Jiepei.com Inc. All Rights Reserved. 版权所有:杭州捷配信息科技有限公司 浙公网安备 33010502006866号 浙ICP备10014259号-119 营业执照ICP证