SGM66099B
Synchronous Boost Converter
with Ultra-Low Quiescent Current
GENERAL DESCRIPTION
FEATURES
The SGM66099B is an ultra-low quiescent current
synchronous Boost converter. 1.15V to 5.2V operation
input voltage is suitable for Li-Mn battery, NiMH and
Li-Ion rechargeable batteries. The 1.7μA (TYP) quiescent
current maximizes the light load efficiency and also
increases the effective battery operation time. In
addition, the high-side synchronous rectifier provides
output disconnect feature which minimizes unnecessary
current drawn from the battery during shutdown mode.
● Operating Input Voltage Range: 1.15V to 5.2V
● Ultra-Low Quiescent Current
1.7µA (TYP) Ultra-Low IQ into VOUT Pin
0.05µA (TYP) Ultra-Low IQ into VIN Pin
● 1.2MHz Fixed Frequency Operation
● Adjustable Output Voltage from 2.5V to 5.2V
● 5.0V Fixed Output Voltage Version
● Power-Save Mode for Improved Efficiency at Low
Output Power
The SGM66099B is able to deliver 300mA output
current from 3.3V to 5V conversion, and achieves up to
93% efficiency at 200mA load.
● Regulated Output Voltage in Down Mode
● True Disconnection During Shutdown
● Up to 93% Efficiency from 10mA to 300mA Load
● -40℃ to +85℃ Operating Temperature Range
● Available in Green WLCSP-1.22×0.83-6B and
The device provides down mode where the desired
output voltage is regulated even when input voltage is
higher than the output. In addition, when the input
voltage is 300mV above the output voltage set point,
the device enters pass-through mode.
TDFN-2×2-6AL Packages
The device integrates various protection features such
as over-current protection, over-voltage protection and
thermal shutdown. In addition, the synchronous rectifier
supports short circuit protection which further improves
the robustness of the device.
APPLICATIONS
LCD Bias
Optical Heart Rate Monitor LED Bias
Portable and Wearable Applications
Low Power Wireless Applications
Battery Powered Systems
The SGM66099B provides both adjustable output
voltage and fixed output voltage versions. It is available
in Green WLCSP-1.22×0.83-6B and TDFN-2×2-6AL
packages.
TYPICAL APPLICATION
L
VIN
2.2μH
1.15V to 5.2V
CIN
10μF
SW
VOUT
2.5V to 5.2V
VIN
VOUT
REN
10kΩ
CFWD
22pF
COUT1
10μF
COUT2
10μF
SGM66099B-ADJ
R1
EN
CEN
10nF
FB
GND
R2
Figure 1. Typical Application Circuit
SG Micro Corp
AUGUST 2022 – REV. B
www.sg-micro.com