Datasheet > SEC1110I-A5-02

SEC1110I-A5-02

更新时间： 2024-02-14 22:18:01

品牌	Logo	应用领域
美国微芯 - MICROCHIP		数据传输 PC 外围集成电路
页数	文件大小	规格书
218页	1700K
描述
UNIVERSAL SERIAL BUS CONTROLLER, QCC16, ROHS COMPLIANT, SQFN-16

阅读下载

中文翻译

获取价格

技术参数
数据手册
替代型号

如果您发现信息不准确，欢迎纠错

SEC1110I-A5-02 技术参数

是否Rohs认证：	符合	生命周期：	Active
零件包装代码：	QFN	包装说明：	HQCCN, LCC16,.2SQ,32
针数：	16	Reach Compliance Code：	compliant
ECCN代码：	3A001.A.3	HTS代码：	8542.31.00.01
Factory Lead Time：	5 weeks	风险等级：	0.64
Samacsys Confidence：	3	Samacsys Status：	Released
Samacsys PartID：	276743	Samacsys Pin Count：	17
Samacsys Part Category：	Integrated Circuit	Samacsys Package Category：	Quad Flat No-Lead
Samacsys Footprint Name：	SEC1110I-A5-02-1	Samacsys Released Date：	2019-01-07 07:22:21
Is Samacsys：	N	最大数据传输速率：	1.2 MBps
JESD-30 代码：	S-PQCC-N16	JESD-609代码：	e3
长度：	5 mm	端子数量：	16
最高工作温度：	85 °C	最低工作温度：	-40 °C
封装主体材料：	UNSPECIFIED	封装代码：	HQCCN
封装等效代码：	LCC16,.2SQ,32	封装形状：	SQUARE
封装形式：	CHIP CARRIER, HEAT SINK/SLUG	认证状态：	Not Qualified
座面最大高度：	1 mm	最大压摆率：	7.5 mA
最大供电电压：	5.5 V	最小供电电压：	3.6 V
标称供电电压：	5 V	表面贴装：	YES
技术：	CMOS	温度等级：	INDUSTRIAL
端子面层：	Matte Tin (Sn) - annealed	端子形式：	NO LEAD
端子节距：	0.8 mm	端子位置：	QUAD
宽度：	5 mm	uPs/uCs/外围集成电路类型：	BUS CONTROLLER, UNIVERSAL SERIAL BUS
Base Number Matches：	1

SEC1110I-A5-02 数据手册

SEC1110/SEC1210

Smart Card Bridge to USB and UART Interfaces

- Protocol timers (Guard, Timeout, and CWT)

General Description

for EMV-defined timing parameters

–Detection of an unresponsive card

–Activation/deactivation sequences

–Cold/warm resets

The SEC1110 and SEC1210 provide a single-chip

solution for a Smart Card bridge to USB and UART

interfaces. These bridges are controlled by an

enhanced 8051 micro controller and all chip peripher-

als are accessed and controlled through the SFR or

XDATA register space. TrustSpan^TMTechnology

enables digital systems to securely communicate, pro-

cess, move and store information on system boards,

across networks and through the cloud.

–Monitoring for all EMV timing constraints

–16-bit general purpose down counter for software

timing use

- Fully compliant ESD protection on card pins

• USB

- 12 Mbps USB operation compliant to the

USB 2.0 Specification

- Integrated USB 1.5 K pull-up resistor and

Dp,Dm series termination resistors

- Integrated USB devices controller with:

–8/16/32/64 byte control buffer

–Five 8/16/32/64 byte programmable (bulk/

interrupt) endpoint buffers

• 8051 Processor

- Reduced instruction cycle time (approxi-

mately 9 times 80C51)

- 9.6 MHz max clock speed

- Enhanced peripherals; three 16-bit timers,

watchdog timer, interrupt controller, JTAG

- OTP (One Time Programmable)

ROM : 16 KB RAM : 1.5 KB

Feature Highlights

• Smart Card

- The SEC1110 provides one Smart Card inter-

face and the SEC1210 provides two

- Fully compliant with ISO/IEC 7816, EMV 4.2/

4.3, ETSI TS 102 221 and PC/SC standards

- Versatile ETU rate generation, supporting

current and proposed rates (up to 826 Kbps)

- Full support of both T=0 and T=1 protocols

- Full-packet FIFO (261 bytes), for transmit

and receive

- Half-duplex operation (no software interven-

tion required between transmit and receive

phases of exchange)

- Loose real-time response required of soft-

ware (approximately 180 ms)

• Boot ROM : 16 KB UART (SEC1210 only)

—

Standard PC baud rates supported

—

3 M baud high-speed rate (not PC standard)

• SPI (SEC1210 only)

- Master capability with 12 MHz max perfor-

mance

- Dynamically programmable FIFO threshold

with byte granularity

- Time-out FIFO flush interrupt, independent of

threshold

• General

- 5.0 V tolerance on user accessible IO pins

- Self-clocking internal oscillator, no external

crystal required

- Programmable Smart Card clock frequency

- UART-like register file structure

- Supports Class A, Class B, Class C, or Class

AB Smart Cards (1.8 V, 3.0 V and 5.0 V

cards)

- Automatic character repetition for T=0 proto-

col parity error recovery

- Automatic card deactivation on card removal

and on other system events, including per-

sistent parity errors

- 3.6 V - 5.5 V supply input

–Internal 4.8 V comparator disables Class A card

support if the input voltage is too low

- Available in commercial (0ºC to +70ºC) and

industrial (-40ºC to +85ºC) temperature

ranges

Applications

- Internal procedure byte filtering for T=0 proto-

col

• USB Smart Card reader

• UART-based Smart Card reader

• Dual Smart Card reader

 2013 - 2016 Microchip Technology Inc.

DS00001561C-page 1

12 3 4 5 6 7...218

中文翻译

下载PDF

SEC1110I-A5-02 替代型号

型号	品牌	替代类型	描述	数据表
SEC1110I-A5-02-TR	MICROCHIP	完全替代	Smart Card Bridge to USB and UART Interfaces
SEC1210I-CN-02	MICROCHIP	类似代替	UNIVERSAL SERIAL BUS CONTROLLER, QCC24, 5 X 5 MM, 0.65 MM PITCH, ROHS COMPLIANT, SQFN-24
SEC1110-A5-02	MICROCHIP	类似代替	UNIVERSAL SERIAL BUS CONTROLLER, QCC16, ROHS COMPLIANT, SQFN-16

与SEC1110I-A5-02相关器件

型号	品牌	获取价格	描述	数据表
SEC1110I-A5-02NC	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-A5-02NC-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-A5-02-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-CN-02	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-CN-02NC	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-CN-02NC-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1110I-CN-02-TR	MICROCHIP	获取价格	Smart Card Bridge to USB and UART Interfaces
SEC1201C	SANKEN	获取价格	Chip LEDs
SEC1203C	SANKEN	获取价格	Chip LEDs
SEC1203C	ALLEGRO	获取价格	Single Color LED, Red, Clear, 2mm, SURFACE MOUNT PACKAGE-2

与SEC1110I-A5-02相关文章

BSS123LT1资料解读：电气参数及替代型号推荐
2024-06-21

6
LTC1151C双通道±15V零漂移运算放大器全面解读
2024-06-21

9
CNX36手册解读：产品特性、应用及封装引脚详解
2024-06-21

6
PS9552资料解读：引脚信息、电气参数
2024-06-21

5

产品中心

服务支持

精选活动

关于我们

帮助中心

SEC1110I-A5-02

SEC1110I-A5-02 技术参数

SEC1110I-A5-02 数据手册

SEC1110I-A5-02 替代型号

与SEC1110I-A5-02相关器件

与SEC1110I-A5-02相关文章

您还可以找

产品中心

服务支持

精选活动

关于我们

帮助中心

SEC1110I-A5-02

SEC1110I-A5-02 技术参数

SEC1110I-A5-02 数据手册

SEC1110I-A5-02 替代型号

与SEC1110I-A5-02相关器件

与SEC1110I-A5-02相关文章

您还可以找

您在本页遇到什么问题？