5秒后页面跳转
SC16C554DIA68,518 PDF预览

SC16C554DIA68,518

更新时间: 2024-01-25 18:34:03
品牌 Logo 应用领域
恩智浦 - NXP 通信时钟数据传输外围集成电路
页数 文件大小 规格书
55页 258K
描述
SC16C554DIA68

SC16C554DIA68,518 技术参数

生命周期:Obsolete零件包装代码:LCC
包装说明:QCCJ,针数:68
Reach Compliance Code:unknownHTS代码:8542.31.00.01
风险等级:5.75其他特性:OPERATES AT 2.25 V MINIMUM SUPPLY
地址总线宽度:5边界扫描:NO
最大时钟频率:80 MHz通信协议:ASYNC, BIT
最大数据传输速率:0.625 MBps外部数据总线宽度:8
JESD-30 代码:S-PQCC-J68长度:24.23 mm
低功率模式:YES串行 I/O 数:4
端子数量:68最高工作温度:85 °C
最低工作温度:-40 °C封装主体材料:PLASTIC/EPOXY
封装代码:QCCJ封装形状:SQUARE
封装形式:CHIP CARRIER认证状态:Not Qualified
座面最大高度:4.57 mm最大供电电压:3.63 V
最小供电电压:2.97 V标称供电电压:3.3 V
表面贴装:YES技术:CMOS
温度等级:INDUSTRIAL端子形式:J BEND
端子节距:1.27 mm端子位置:QUAD
宽度:24.23 mmuPs/uCs/外围集成电路类型:SERIAL IO/COMMUNICATION CONTROLLER, SERIAL
Base Number Matches:1

SC16C554DIA68,518 数据手册

 浏览型号SC16C554DIA68,518的Datasheet PDF文件第2页浏览型号SC16C554DIA68,518的Datasheet PDF文件第3页浏览型号SC16C554DIA68,518的Datasheet PDF文件第4页浏览型号SC16C554DIA68,518的Datasheet PDF文件第5页浏览型号SC16C554DIA68,518的Datasheet PDF文件第6页浏览型号SC16C554DIA68,518的Datasheet PDF文件第7页 
SC16C554/554D  
Quad UART with 16-byte FIFO and infrared (IrDA)  
encoder/decoder  
Rev. 05 — 10 May 2004  
Product data  
1. Description  
The SC16C554/554D is a 4-channel Universal Asynchronous Receiver and  
Transmitter (QUART) used for serial data communications. Its principal function is to  
convert parallel data into serial data and vice versa. The UART can handle serial data  
rates up to 5 Mbit/s. It comes with an Intel or Motorola interface.  
The SC16C554/554D is pin compatible with the ST16C554 and TL16C554 and it will  
power-up to be functionally equivalent to the 16C454. Programming of control  
registers enables the added features of the SC16C554/554D. Some of these added  
features are the 16-byte receive and transmit FIFOs, automatic hardware or software  
flow control and Infrared encoding/decoding. The selectable auto-flow control feature  
significantly reduces software overload and increases system efficiency while in FIFO  
mode by automatically controlling serial data flow using RTS output and CTS input  
signals. The SC16C554/554D also provides DMA mode data transfers through FIFO  
trigger levels and the TXRDY and RXRDY signals. On-board status registers provide  
the user with error indications, operational status, and modem interface control.  
System interrupts may be tailored to meet user requirements. An internal loop-back  
capability allows on-board diagnostics.  
The SC16C554/554D operates at 5 V, 3.3 V and 2.5 V, and the industrial temperature  
range, and is available in plastic PLCC68, LQFP64, and LQFP80 packages.  
2. Features  
5 V, 3.3 V and 2.5 V operation  
Industrial temperature range  
The SC16C554/554D is pin compatible with the industry-standard  
ST16C454/554, ST68C454/554, ST16C554, TL16C554  
Up to 5 Mbit/s data rate at 5 V and 3.3 V, and 3 Mbit/s at 2.5 V  
16-byte transmit FIFO  
16-byte receive FIFO with error flags  
Automatic software/hardware flow control  
Programmable Xon/Xoff characters  
Software selectable Baud Rate Generator  
Four selectable Receive FIFO interrupt trigger levels  
Standard modem interface or infrared IrDA encoder/decoder interface  
Sleep mode  
Standard asynchronous error and framing bits (Start, Stop, and Parity Overrun  
Break)  
Transmit, Receive, Line Status, and Data Set interrupts independently controlled  
 
 

与SC16C554DIA68,518相关器件

型号 品牌 描述 获取价格 数据表
SC16C554DIB64 NXP Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

获取价格

SC16C554DIB64,128 NXP SC16C554DIB64

获取价格

SC16C554DIB64,151 NXP SC16C554DIB64

获取价格

SC16C554IB64 NXP Quad UART with 16-byte FIFO and infrared (IrDA) encoder/decoder

获取价格

SC16C554IB64,128 NXP SC16C554IB64

获取价格

SC16C554IB64,151 NXP SC16C554IB64

获取价格