DESIGNED & DIMENSIONED
IN MILLIMETERS[INCHES]
REVISION J
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
TEFLON CABLE OPTION
-NXX OPTION (END 2)
(ONLY AVAILABLE WITH -D, -DL, -DR, -DS)
-NUS: NOTCH UP, STRAIGHT
(PIN 1 TO N-1) (SEE FIG 2)
-T: TEFLON (AVAILABLE WITH
24, 28 & 30AWG ONLY)
(LEAVE BLANK FOR STANDARD
PVC INSULATION)
FIG 1
S2SDX-05-24-X-XX.XX-S SHOWN
DO NOT
SCALE FROM
THIS PRINT
-NDS: NOTCH DOWN, STRAIGHT
(PIN 1 TO 2) (SEE FIG 4)
No OF POSITONS
-02, -04, -05, -07, -10, -15, -20,
-25, & -30 (PER ROW)
AVAILABLE AS STANDARD
-05 THRU -50 AVAILABLE AS ASO
2.00 .079 REF
N (SEE TABLE 1)
-NUX: NOTCH UP, CROSSED
(PIN 1 TO N) (SEE FIG 3)
-NDX: NOTCH DOWN, CROSSED
(PIN 1 TO 1) (SEE FIG 5)
(No OF POS X 2.00[.079])
+ 3.50[.138] REF
02
WIRE GAUGE (AWG)
END OPTION
7.52 .296
REF
-24, -26, -28, & 30
2.00 .079 REF
-S: SINGLE ENDED (SEE FIG 1)
-D: DOUBLE ENDED (SEE FIG'S 2, 3, 4, 5, 6, & 7)
-SR: SINGLE ENDED WITH RETENTION LATCH
(SEE FIG 6)
COLOR CODE:
(LEAVE BLANK FOR ALL BLACK WIRE)
-C: COLOR CODED WIRE, SEE TABLE 3,
SHEET 3 FOR COLOR SEQUENCE
(AVAILABLE WITH 24 AWG ONLY &
NOT AVAILABLE WITH TEFLON)
01
-DR: DOUBLE ENDED WITH RETENTION LATCH
(SEE FIG 7)
N-1 (SEE TABLE 1)
3.32 .131 REF
**-SS: SINGLE ENDED WITH SCREW DOWN
(SEE SHEET 4 FIG 8)
ONLY AVAILABLE IN -10, -20, -30,
& -40 POSITIONS
(No OF POS X 2.00[.079])
+ .43[.017] REF
**-DS: DOUBLE ENDED WITH SCREW DOWN
(SEE SHEET 4 FIG 9)
PLATING SPECIFICATION
-L: LIGHT SELECTIVE
-S: SELECTIVE
ONLY AVAILABLE IN -10, -20, -30,
& -40 POSITIONS
(No OF POS X 2.00[.079])
+ .86[.034] REF
4.39 .173 REF
5.29 .208 REF
"A"
ASSEMBLED LENGTH
SPECIFY IN INCHES
SINGLE ENDED: 02.75 INCH MINIMUM
DOUBLE ENDED: 02.75 INCH MINIMUM
4.42 .174 REF
11.38 .448
REF
ISD2-XX-D
** = NOT RELEASED FOR PRODUCTION
1.60 .063 REF
C
ASSEMBLED LENGTH
(SEE NOTE 8)
DWC-XX-XX-300
NOTES:
"A"
C
SECTION "A"-"A"
1.
REPRESENTS A CRITICAL DIMENSION.
2. MINIMUM PULLOUT FORCE: 11.1N [2.5LBS].
3. CONTACTS MUST BE INSERTED UNTIL RETENTION
FEATURES LOCK INTO PLACE.
C
C
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN MILLIMETERS. THIS DOCUMENT CONTAINS INFORMATION
TOLERANCES ARE:
DECIMALS
PROPRIETARY NOTE
4. ALL FINISHED GOODS ARE TO BE ELECTRICALLY
TESTED INCLUDING HI-POT TEST AT 1000 VOLTS DC.
AFTER FINAL ELECTRICAL TEST, LABEL EACH ASSEMBLY WITH
(1) LABEL-ET.
CONFIDENTIAL AND PROPRIETARY TO
SAMTEC, INC. AND SHALL NOT BE REPRODUCED
ANGLES
2
OR TRANSFERRED TO OTHER DOCUMENTS OR
DISCLOSED TO OTHERS OR USED FOR ANY
PURPOSE OTHER THAN THAT WHICH IT WAS
OBTAINED WITHOUT THE EXPRESSED WRITTEN
CONSENT OF SAMTEC, INC.
X.X: 0.3 [.01]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
5. TINNED COPPER WIRE IS RoHS COMPLIANT.
6. PARTS TO BE LAYER PACKAGED.
X.XX: 0.13 [.005]
PHONE: 812-944-6733
FAX: 812-948-5047
code 55322
X.XXX: 0.051 [.0020]
e-Mail info@SAMTEC.com
7. END OF DISCRETE WIRE MUST FALL WITHIN THIS RANGE AFTER CRIMP.
8. FOR LENGTHS OF 12.00 INCHES AND LESS, TOLERANCE TO BE ± 3.18[.125],
FOR LENGTHS GREATER THAN 12.00 INCHES, TOLERANCE TO BE ± 2%
SHEET SCALE: 2:1
DO NOT SCALE DRAWING
DESCRIPTION:
MATERIAL:
2.00mm SOCKET DISCRETE CABLE ASSEMBLY
DWG. NO.
INSULATOR: LCP, COLOR: BLACK
CONTACT: BeCU
CABLE INSULATION: SEE CALLOUT
WIRE: TINNED COPPER
9. REFER TO CRIMP SPECIFICATIONS PRINT FOR CRIMP AND STRIP DIMENSIONS,
TOLERANCES, TOOLING AND ITS REQUIREMENTS.
S2SDX-XX-XXX-XX-XX.XX-XX-XXX
10. 20.0N[4.5 LB] MIN WIRE CRIMP STRENGTH FOR 24-28 AWG AND
13.3N[3.0 LB] MIN WIRE CRIMP STRENGTH FOR 30AWG.
SHEET 1 OF 4
BY:
J. BORGELT 2/20/09
F:\DWG\MISC\MKTG\S2SDX-XX-XXX-XX-XX.XX-XX-XXX-MKT.SLDDRW
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
如果您发现信息不准确，
