S29AL016J
16-Mbit (2M × 8-Bit/1M × 16-Bit), 3 V,
Boot Sector Flash
Distinctive Characteristics
Architectural Advantages
Performance Characteristics
Single Power Supply Operation
High Performance
❐ Full voltage range: 2.7 to 3.6 volt read and write operations
❐ Access times as fast as 55 ns
for battery-powered applications
❐ Automotive, AEC-Q100 Grade 3 (–40°C to +85°C)
❐ Automotive, AEC-Q100 Grade 1 (–40°C to +125°C)
❐ Industrial temperature range (–40°C to +85°C)
❐ Extended temperature range (–40°C to +125°C)
Ultra Low Power Consumption (typical values at 5 MHz)
Manufactured on 110 nm Process Technology
❐ Fully compatible with 200 nm S29AL016D
Secured Silicon Sector region
❐ 128-word/256-byte sector for permanent, secure identifica-
tion through an 8-word/16-byte random Electronic Serial
Number accessible through a command sequence
❐ May be programmed and locked at the factory or by the cus-
tomer
❐ 0.2 µA Automatic Sleep mode current
❐ 0.2 µA standby mode current
❐ 7 mA read current
❐ 20 mA program/erase current
Cycling Endurance: 1,000,000 cycles per sector typical
Flexible Sector Architecture
❐ One 16 Kbyte, two 8 Kbyte, one 32 Kbyte, and thirty-one 64
Kbyte sectors (byte mode)
Data Retention: 20 years typical
❐ One 8 Kword, two 4 Kword, one 16 Kword, and thirty-one 32
Package Options
48-ball Fine-pitch BGA
64-ball Fortified BGA
48-pin TSOP
Kword sectors (word mode)
Sector Group Protection Features
❐ Ahardware method of locking a sector to prevent any program
or erase operations within that sector
❐ Sectors can be locked in-system or via programming equip-
ment
❐ Temporary Sector Unprotect feature allows code changes in
previously locked sectors
Software Features
CFI (Common Flash Interface) Compliant
Unlock Bypass Program Command
❐ Provides device-specific information to the system, allowing
host software to easily reconfigure for different Flash devices
❐ Reduces overall programming time when issuing multiple
program command sequences
Erase Suspend/Erase Resume
Top or Bottom Boot Block Configurations Available
❐ Suspends an erase operation to read data from, or program
data to, a sector that is not being erased, then resumes the
erase operation
Compatibility with JEDEC standards
❐ Pinout and software compatible with single-power supply
Flash
❐ Superior inadvertent write protection
Data# Polling and Toggle Bits
❐ Provides a software method of detecting program or erase
operation completion
Hardware Features
Ready/Busy# Pin (RY/BY#)
❐ Provides a hardware method of detecting program or erase
cycle completion
Hardware Reset Pin (RESET#)
❐ Hardware method to reset the device to reading array data
WP# input pin
❐ For boot sector devices: at VIL, protects first or last 16 Kbyte
sector depending on boot configuration (top boot or bottom
boot)
Cypress Semiconductor Corporation
Document Number: 002-00777 Rev. *Q
•
198 Champion Court
•
San Jose, CA 95134-1709
•
408-943-2600
Revised June 21, 2018