S08xxA SERIES(LS)
Sensitive Gate Sillicon Controlled Rectifiers
Reverse Blocking Thyristors
SCRs
0.8 AMPERES RMA 600 VOLTS
FEATURES
TO-92 (TO-226AA)
• Sensitive Gate Allows Triggering by Microcontrollers and Other
Logic Circuits
• Blocking Voltage to 600 Volts
TO-92
• On-State Current Rating of 0.8 Amperes RMS at 80°C
Dim.
A
Min.
4.45
4.32
3.18
1.15
2.42
12.7
2.04
3.43
Max.
4.70
5.33
4.19
1.39
2.66
--
• High Surge Current Capability — 10 Amperes
• Minimum and Maximum Values of IGT, VGT and IH Specified
for Ease of Design
B
C
D
• Immunity to dV/dt — 20 V/us Minimum at TJ=110°C
E
• Glass-Passivated Surface for Reliability and Uniformity
• Pb-Free Package
TO-92
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Available in “Green” Package: TO-92
• Lead-Free Finish; RoHS Compliant (Notes 1 & 2)
• Halogen and Antimony Free. “Green” Device (Note 3)
F
G
I
2.66
--
All Dimensions in
millimeter
PIN ASSIGNMENT
Cathode
1
2
3
Gate
Anode
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25℃ ambient temperature unless otherwise specified.
CHARACTERISTICS
SYMBOL
VALUE
UNIT
Peak Repetitive Off– State Voltage (TJ= -40 to 110°C, Sine Wave, 50 to 60 Hz; Gate Open)
VDMS
VRRM
600
V
S08U25600A
S08U50600A
S08M02600A
On-State RMS Current (TC = 80°C) 180° Conduction Angles
Peak Non-Repetitive Surge Current (1/2 Cycle, Sine Wave, 60 Hz, TJ = 25°C)
Circuit Fusing Consideration (t = 8.3 ms)
IT(RMS)
ITSM
0.8
10
A
A
I2t
0.415
0.1
A2s
W
W
A
PGM
PGM(AV)
IGM
Forward Peak Gate Power (TA = 25℃, Pulse Width 1.0 us)
Forward Average Gate Power (TA = 25℃, t = 8.3 ms)
Forward Peak Gate Current (TA = 25℃, Pulse Width≦1.0 us)
Reverse Peak Gate Voltage (TA = 25℃, Pulse Width≦1.0 ms)
Operating temperature range @ Rate VRRM and VDRM
Storage temperature range
0.01
1.0
VGRM
TJ
5
V
-40 to +110
-40 to +150
°C
°C
TSTG
Note :
1. EU Directive 2002/95/EC (RoHS), 2011/65/EU (RoHS 2) & 2015/863/EU (RoHS 3) compliant. All applicable RoHS exemptions applied.
2. See https://www.diodes.com/quality/lead-free/ for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony
compounds.
4. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with
negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded.
1 of 6
www.diodes.com
July 2022
S08xxA SERIES(LS)
© 2022 Copyright Diodes Incorporated. All Rights Reserved.
Document number: DS43874 Rev. 5 - 2