Amphenol
Filtered Connectors
Introduction
manufacturers of both Industrial (Class A) and Commercial (Class B) products. The FCC Series of
filtered connectors are instrumental in passing these requirements because the chief cause of
noncompliance is traceable to noise radiated from the I/O cables. A filtered connector at the I/O port
removes the noise before it exits the system.
The cost of EMI/RFI control has dropped dramatically with the introduction of Amphenol CanadaÕs new
FCC Series of filtered modular jacks, D-subminiature and Micro-Ribbon. At less than half the cost of
previous industry levels, the FCC Series products have already solved EMI/RFI problems for a host of
electronic equipment designers. These filtered connectors are useful for dealing with the two main
EMI/RFI control issues.
Noise Protection
Unwanted EMI/RFI noise or electrostatic discharge can be removed from an I/O cable if a filtered
connector is used at the I/O port. This prevents false signals and protects the equipment from damaging
voltage spikes thereby greatly enhancing device immunity from external effects.
FCC Compliance
FCC Docket 20780, Part 15, Subpart J imposes electromagnetic radiation emission limitations upon
FCC17 Series Ñ Filtered D-Sub Connectors
Designed to provide EIA RS-232 and RS-449 compatibility. Intermateable with standard non-filtered
Amphenol 17 Series D-Subs and connectors meeting MIL-C-24308. Materials. Shell: High strength
zinc diecast or stamped steel. Contacts: Phosphor bronze. Inserts: High strength thermoplastic material
(complies with UL flammability requirements of 94V-O per UL-STD-94). Finish. Shell: Bright tin plating
per MIL-T-10727. Contacts: 15 µ" gold plating per MIL-G-45204 on contact area over 100 µ" nickel
plating. Operating Temperature: Ð40¡C to +85¡C.
Solder Cup (Plug) Ñ Fig. A
EACH
Stock
No.
Mfr.Õs
Type
No. of
Contacts
CAP
(pF)
1-9
10-49
50-99
625-0005
625-0010
625-0015
625-0020
625-0025
625-0030
625-0035
625-0040
FCC17-E09PM-210
FCC17-E09PM-240
FCC17-A15PM-210
FCC17-A15PM-240
FCC17-B25PM-210
FCC17-B25PM-240
FCC17-C37PM-210
FCC17-C37PM-240
9
9
470
820
470
820
470
820
470
820
10.98
10.89
14.60
14.74
16.73
17.02
22.98
23.41
9.98
9.98
9.15
9.21
.318 (Footprint) Right Angle PCB with 4-40 Thread (Plug) Ñ Fig. C
EACH
15
15
25
25
37
37
13.38
13.52
15.44
15.71
21.22
21.61
12.35
12.48
14.34
14.59
19.70
20.06
Stock
No.
Mfr.Õs
Type
No. of
CAP
(pF)
Contacts
1-9
10-49
50-99
625-0155
625-0160
625-0165
625-0170
625-0175
625-0180
625-0185
625-0190
FCC17-E09PA-410
FCC17-E09PA-440
FCC17-A15PA-410
FCC17-A15PA-440
FCC17-B25PA-410
FCC17-B25PA-440
FCC17-C37PA-410
FCC17-C37PA-440
9
9
470
820
470
820
470
820
470
820
11.65
11.65
14.13
14.13
16.63
16.63
21.48
24.12
10.75
10.75
13.04
13.04
15.35
15.35
19.69
22.27
9.98
9.98
15
15
25
25
37
37
12.11
12.11
14.25
14.25
18.17
20.68
Solder Cup (Receptacle) Ñ Fig. A
8
625-0045
625-0050
625-0055
625-0060
625-0065
625-0070
625-0075
625-0080
FCC17-E09SM-210
FCC17-E09SM-240
FCC17-A15SM-210
FCC17-A15SM-240
FCC17-B25SM-210
FCC17-B25SM-240
FCC17-C37SM-210
FCC17-C37SM-240
9
9
470
820
470
820
470
820
470
820
11.91
12.24
15.50
15.49
18.73
19.03
30.52
30.92
10.91
11.13
14.31
14.20
17.17
17.44
28.17
28.54
10.07
10.20
13.29
13.10
15.85
16.10
26.16
26.51
15
15
25
25
37
37
.318 (Footprint) Right Angle PCB with 4-40 Thread (Receptacle) Ñ Fig. C
625-0195
625-0200
625-0205
625-0210
625-0215
625-0220
625-0225
625-0230
FCC17-E09SA-410
FCC17-E09SA-440
FCC17-A15SA-410
FCC17-A15SA-440
FCC17-B25SA-410
FCC17-B25SA-440
FCC17-C37SA-410
FCC17-C37SA-440
9
9
470
820
470
820
470
820
470
820
11.65
11.65
14.13
12.59
14.80
16.63
24.12
24.12
10.75
10.75
13.04
11.54
13.57
15.35
22.27
22.27
9.98
9.98
15
15
25
25
37
37
12.11
10.66
12.52
14.25
20.68
20.68
Straight PCB (Plug) Ñ Fig. B
625-0085
625-0090
625-0095
625-0100
625-0105
625-0110
625-0111
625-0112
FCC17-E09PE-210
FCC17-E09PE-240
FCC17-A15PE-210
FCC17-A15PE-240
FCC17-B25PE-210
FCC17-B25PE-240
FCC17-C37PE-210
FCC17-C37PE-240
9
9
470
820
470
820
470
820
470
820
11.65
11.65
14.13
14.13
16.63
16.63
24.12
24.12
10.75
10.75
13.04
13.04
15.35
15.35
22.27
22.27
9.98
9.98
15
15
25
25
37
37
12.11
12.11
14.25
14.25
20.68
20.68
Male Plug to Female Receptacle Adapter Ñ Fig. D
625-0235
625-0240
625-0245
625-0250
625-0255
625-0260
625-0265
625-0270
625-0275
625-0280
625-0285
625-0290
FCC17-E09AD-210
FCC17-E09AD-240
FCC17-E09AD-290
FCC17-A15AD-210
FCC17-A15AD-240
FCC17-A15AD-290
FCC17-B25AD-210
FCC17-B25AD-240
FCC17-B25AD-290
FCC17-C37AD-210
FCC17-C37AD-240
FCC17-C37AD-290
9
9
9
470
820
5600
470
820
5600
470
820
5600
470
26.93
27.58
28.37
30.28
30.28
31.52
33.71
33.71
35.82
40.02
40.02
43.16
24.86
25.28
26.01
27.95
27.95
29.09
31.12
31.12
33.06
36.94
36.94
39.84
23.08
23.33
24.01
25.95
25.95
27.02
28.90
28.90
30.70
34.30
34.30
37.00
Straight PCB (Receptacle) Ñ Fig. B
15
15
15
25
25
25
37
37
37
625-0115
625-0120
625-0125
625-0130
625-0135
625-0140
625-0145
625-0150
FCC17-E09SE-210
FCC17-E09SE-240
FCC17-A15SE-210
FCC17-A15SE-240
FCC17-B25SE-210
FCC17-B25SE-240
FCC17-C37SE-210
FCC17-C37SE-240
9
9
470
820
470
820
470
820
470
820
11.65
11.65
14.13
14.13
16.63
16.63
24.12
24.12
10.75
10.75
13.04
13.04
15.35
15.35
22.27
22.27
9.98
9.98
15
15
25
25
37
37
12.11
12.11
14.25
14.25
20.68
20.68
820
5600
RJ Vistaª High Speed
RJ-45 Modular Jacks
Filtered and Shielded
Modular Jacks
The FRJ series of Shielded and FIltered Modular
Jacks offers low cost and effective EMC control
within standard RJ-45 connector footprints.
EMC control is offered by a completely shielded
connector and/or with the use of a high
RJ Vistaª is a family of single and multiport
modular jack connectors with built-in LEDs,
designed for Category 5 performance. This product
is ideal for LAN applications such as adapter cards
and routers. Shielded and non-shielded versions
are available, with a variety of LED colors, and ports. U.L. File #E135615, CSA File #LR68598.
resistivity, high impedance ferrite block. No board layout changes are required for its use. Simply replace
the standard non-filtered connector for superior EMC performance.
Materials. Shield: Copper alloy/tin-lead plated. Contacts: Phosphor bronze; 50 µ" (1.27 microns) gold
over nickel on mating surfaces, tin/lead on contact tails. Insert: Thermoplastic (complies with UL94V-0).
Current Rating: 1.5 amps. Voltage Rating: 125 VAC.
Materials. Shield: Copper alloy. Contacts: Phosphor bronze; 30 µ" (0.76 microns) gold over nickel.
Insert: Thermoplastic (complies with UL 94V-O). Filter: High impedance, high resistivity, ferrite block.
Electrical. Current Rating: 1.5 amps. Voltage Rating: 125 volts AC. UL File No.: E135615. CSA File
No.: LR68598-11.
Non-Shielded Ñ 8 Contacts
EACH
Stock
No.
Mfr.Õs
Type
LED 1
LED2
Non-Shielded Ñ 8-Contacts
1-49
50-99
100-249
EACH
Stock
No.
Mfr.Õs
Type
625-0355
625-0360
625-0365
625-0370
RJHS-5080
RJHS-5081
RJHS-5084
RJHS-5085
None
None
1.13
1.32
1.32
1.39
.90
1.04
1.04
1.10
.75
.86
.86
.91
Description
Filtered
Green
Yellow
Green
Yellow
Green
Green
1-49
1.55
50-99
1.24
100-249
1.05
625-0330
FRJA-448
Shielded Ñ 8 Contacts
Shielded and Filtered Ñ 8-Contacts
625-0375
625-0380
625-0385
625-0390
RJHS-5380
None
None
1.82
2.11
2.00
2.11
1.46
1.69
1.60
1.69
1.21
1.41
1.34
1.41
625-0335
625-0340
625-0345
625-0350
FRJA-488
FRJA-468
FRJA-438
FRJA-418
Shielded
Filtered and Shielded
Shielded
2.21
2.87
1.95
2.87
1.76
2.31
1.58
2.29
1.49
1.91
1.31
1.92
RJHS-5381
RJHS-5384
RJHS-5385
Green
Yellow
Green
Yellow
Green
Green
Filtered and Shielded
Turn To Section 1 For Allied Office Addresses and Local Phone Numbers
ALLIED c 441
5秒后页面跳转
BSS138LT3G：一款高效能N沟道MOSFET的全面解析
解读EGP10B二极管资料手册：产品特性、参数分析
RT9164AGG手册资料详解：引脚信息、设计指南
2SA1037KPT资料详解：产品特性、电气参数、设计指南
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
技术参数
数据手册
替代型号
如果您发现信息不准确，
