R&E International
RE46C112
Ionization Smoke Detector IC
Product Specification
Features
General Description
•
•
•
•
•
•
•
Guard Outputs for Ion Detector Input
± 0.75pA Detect Input Current
The RE46C112 is an ionization type smoke detector IC.
It is intended for applications using ionization type
chambers to detect smoke. When enabled, VOUT is ¼
of either the DETECT input or VDD depending on the
status of the SELECT input. When the Select input is
allowed to float the circuit is in the low current mode
with only the guard amplifier enabled.
Utilizing low power CMOS technology the RE46C112
was designed for use in smoke detectors that comply
with Underwriters Laboratory Specification UL217.
Microprocessor A/D Compatible Analog Output
Low Quiescent Current Consumption (<10uA)
Available in 8L PDIP or 8L N SOIC
2000V ESD Protection (HBM)
Available in Standard Packaging or RoHS
Compliant Pb Free Packaging
Pin Configuration
G2
1
8
VDD
VCC
DETECT
G1
SELECT
VSS
VOUT
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Supply Voltage
SYMBOL
VALUE
12.5
UNITS
VDD
VCC
V
V
Supply Voltage
6
Detect Input Voltage Range
SELECT Input Voltage Range
Operating Temperature
Storage Temperature
VINDET
VINSEL
TA
TSTG
TJ
VDD +.3
VCC +.3
-10 to 60
-55 to 125
150
V
V
°C
°C
°C
Maximum Junction Temperature
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only and operation at these conditions for extended periods may affect device reliability.
This product utilizes CMOS technology with static protection; however proper ESD prevention procedures should be used
when handling this product. Damage can occur when exposed to extremely high static electrical charge
Telephone 610.992.0727
Page 1 of 5
Facsimile 610.992.0734
E-mail: rande@randeint.com
DS-RE46C112-011207
This datasheet contains PROPRIETARY and CONFIDENTIAL information.