QTH-XXX-XX-X-D-XXX
REVISION BL
No OF POSITIONS
OPTION
-LC: LOCKING CLIPS
-030, -060, -090,
*-120, *-150 (PER ROW)
* (SEE NOTE 11)
(USE LC-08-TM-01, SEE FIG 2, SHT 2))
-A: ALIGNMENT PINS
DO NOT
SCALE FROM
THIS PRINT
(USE QTH-30-XX-D-XX-A FOR -01 & -02)
(FOR -03 THRU -10 SEE TABLE 6, SHT 3)
-K: POLYIMIDE FILM (USE K-DOT-.276-.375-.005)
(AVAILABLE ON -01 THRU -04, -09 & -10 ONLY)
(SEE FIG 4, SHT 2)
-TR: TAPE & REEL (-090 POS MAX)
(-060 POS MAX W/ -GP OPTION)
(N/A ON -05 THRU -08)
LEAD STYLE
-01: .1680[4.267]
-02: .2861[7.264]
-03: .4043[10.269]
-04: .6001[15.246]
-05: .7181[18.240]
-06: .8361[21.237]
-07: .9542[24.237]
-08: 1.1511[29.238]
-09: .5224[13.269]
-10: .5618[14.269]
(SEE FIG 12, SHT 6)
(SEE NOTE 15)
-GP: GUIDE POSTS
(AVAILABLE ON -01 & -02 ONLY)
(USE QTH-30-XX-D-XX-X-GP)
(SEE FIG 8, SHT 4)
C
= SEE TABLE 6, SHT 3
"A"
-FL: FRICTION LOCKS (SEE FIG 9, SHT 4)
(NOT AVAILABLE WITH -GP)
-RT1: RETENTION OPTION (SEE FIG 10, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(MUST USE -A OPTION)
(USE QTH-30-01-D-XX-A-RT1 & T-1R36-01-F)
(NOT AVAILABLE WITH -LC, -GP, OR -FL)
-L: LATCHING OPTION (SEE FIG 11, SHT 5)
(ONLY AVAILABLE ON -01 LEAD STYLE)
(USE QTH-30-01-D-XX-L)
PLATING SPECIFICATION
.7875 20.003 (TYP)
-F: 3 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
(USE T-1SXX-XX-F & T-1GXX-XX-F) (SEE NOTE 7)
-L: 10 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
29 EQ SPCS @
.0197[.500]
= .571 14.50
(TYP)
(USE T-1SXX-XX-L & T-1GXX-XX-L)
-H: 30 µ'' GOLD IN CONTACT AREA,
3 µ'' GOLD ON TAIL
.235 5.97
REF
(NOT AVAILABLE WITH -LC, -GP, -FL, OR -RT1)
(-060 POS MAX)
(USE T-1SXX-XX-H & T-1GXX-XX-G)
-C: 50 µ'' SELECTIVE GOLD IN CONTACT AREA,
MATTE TIN ON TAIL
01
-FR: FULL REEL QTY. TAPE & REEL (-090 POS MAX)
(-060 POS MAX W/ -GP OPTION)
(N/A ON -05 THRU -08)
(USE T-1SXX-XX-C, T-1GXX-XX-L)
(SEE NOTE 16)
.155 3.9 REF
(SEE NOTE 12)
ROW SPECIFICATION
-D: DOUBLE (USE QTH-30-XX-D-XX
& QTHH-30-XX-D-XX)
02
.008 0.2 REF
.644 16.4 REF
.047 1.19 REF
"A"
QTH-30-XX-D-XX-A
"C" REF
.155±.003 3.94±0.08
C
(SEE NOTE 12)
+.003
-.002
[0.08]
[0.03]
.038 0.95
REF
C
"B"
T-1SXX-XX-X
(SEE TABLE 1)
(SEE NOTE 5 & 8)
.745 18.9 REF
"D" REF
"A"
T-1G1-XX-X
C
SEE TABLE 3
(SEE NOTE 8)
.080 2.03 REF
.098 2.49 REF
(SEE NOTE 14)
(SEE NOTE 10)
.015 0.4 REF
.031 0.8 REF
NOTES:
FIG 1
.035 0.89 REF
1.
REPRESENTS A CRITICAL DIMENSION.
C
-A: ALIGNMENT PIN OPTION
(STYLE -01 & -02 ONLY)
.280 7.11
2. MINIMUM PUSHOUT FORCE: 6 OZ FOR –01 & -02, 8 OZ FOR –03 THRU –10.
3. MINIMUM GROUND PLANE RETENTION: 1 LB.
(QTH-090-01-X-D-A SHOWN)
SECTION "A"-"A"
4. PARTS TO BE MOLDED TO POSITION.
5. MAXIMUM VARIANCE OF .002 [0.05]. APPLIES TO SIGNAL OR GROUNDS
INDEPENDENT OF THE GROUND OR SIGNAL PINS RESPECTIVELY.
6. LEAD STYLES -03 THRU -10: TOP BODY (QTH) CANNOT HAVE -A OPTION.
7. -L PLATING CAN BE SUBSTITUTED FOR -F PLATING.
PROPRIETARY NOTE
THIS DOCUMENT CONTAINS CONFIDENTIAL AND
PROPRIETARY INFORMATION AND ALL DESIGN,
MANUFACTURING, REPRODUCTION, USE, PATENT RIGHTS
AND SALES RIGHTS ARE EXPRESSLY RESERVED BY SAMTEC,
INC. THIS DOCUMENT SHALL NOT BE DISCLOSED, IN WHOLE
OR PART, TO ANY UNAUTHORIZED PERSON OR ENTITY NOR
REPRODUCED, TRANSFERRED OR INCORPORATED IN ANY
OTHER PROJECT IN ANY MANNER WITHOUT THE EXPRESS
WRITTEN CONSENT OF SAMTEC, INC.
*
*
UNLESS OTHERWISE SPECIFIED,
DIMENSIONS ARE IN INCHES.
TOLERANCES ARE:
DECIMALS
ANGLES
2
8. GROUND PLANE NOT TO BE INCLUDED IN COPLANARITY.
9. T-1R36 RETENTION TO BODY TO BE 1.0 LBF.
.XX: .01[0.3]
520 PARK EAST BLVD, NEW ALBANY, IN 47150
PHONE: 812-944-6733 FAX: 812-948-5047
e-Mail info@SAMTEC.com code 55322
DESCRIPTION:
.XXX: .005[0.13]
10. CUT OFF BURR NOT TO EXCEED .003 [0.08] IN ANY DIRECTION, BURR PLUS TAB
HEIGHT NOT TO EXCEED .006 [0.15].
.XXXX: .0020[0.051]
11. FOR NEW APPLICATIONS REQUIRING THESE POSITIONS, PLEASE CONTACT SAMTEC
INTERCONNECT PROCESSING GROUP.
SHEET SCALE: 1.75:1
DO NOT SCALE DRAWING
MATERIAL:
INSULATOR: LCP UL94V-0, COLOR: BLACK
TERMINAL & GROUND PLANE: PHOS BRONZE
.5mm DOUBLE ROW HS TERMINAL ASSEMBLY
12. MAXIMUM PIN CAN EXTEND PAST WALL .003 [0.08]
13. AVAILABLE MATING WITH QSH-D-GP,BUT NOT AVAILABLE MATING WITH QSH-D-RA-GP OPTION.
14. GROUND PLANE TO BE .001±.001 ABOVE SEATING PLANE (MAX CONTACT COPLANARITY).
15. -TR OPTION ORDERS INVOLVING PARTIAL REEL QUANTITIES MAY BE PACKAGED ACCORDING TO
THE SAMTEC PACKAGING EFFICIENCY STANDARDS (SPES) FOUND ON WWW.SAMTEC.COM.
16. -FR OPTIONS WILL BE SHIPPED AT THE MAX QUANTITY PER REEL, BASED ON OPTIONS SELECTED.
NO. QTH-XXX-XX-X-D-XXX
DWG.
BY:
DEAN P
09-14-2010 SHEET 1 OF 6
F:\DWG\MISC\MKTG\QTH-XXX-XX-X-D-XXX-MKT.SLDDRW
5秒后页面跳转
NTC热敏电阻与PTC热敏电阻的应用原理及应用范围
GTO与普通晶闸管相比为什么可以自关断？为什么普通晶闸管不能呢？从GTO原理、应用范围带你了解原因及推荐型号
LF353数据手册解读：特性、应用、封装、引脚说明、电气参数及替换型号推荐
A4950资料手册解读：特性、应用、封装、引脚功能、电气参数及代换型号
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
