IDTQS3VH253
INDUSTRIAL TEMPERATURE RANGE
2.5V / 3.3V DUAL 4:1 MUX/DEMUX HIGH BANDWIDTH BUS SWITCH
QUICKSWITCH® PRODUCTS
IDTQS3VH253
2.5V / 3.3V DUAL 4:1 MUX/DEMUX
HIGH BANDWIDTH BUS SWITCH
FEATURES:
DESCRIPTION:
• N channel FET switches with no parasitic diode to VCC
– Isolation under power-off conditions
– No DC path to VCC or GND
The QS3VH253 HotSwitch Dual 4:1 multiplexer/demultiplexer is a high
bandwidth bus switch. The QS3VH253 has very low ON resistance,
resulting in under 250ps propagation delay through the switch. The Select
(Sx) inputs control the data flow. The multiplexers/demultiplexers are
enabled when the Enable (EA, EB) inputs are low. In the ON state, the
switchescanpasssignalsupto5V. IntheOFFstate,theswitchesoffervery
high impedance at the terminals.
– 5V tolerant in OFF and ON state
• 5V tolerant I/Os
• Low RON - 4Ω typical
• Flat RON characteristics over operating range
• Rail-to-rail switching 0 - 5V
The combination of near-zero propagation delay, high OFF impedance,
and over-voltage tolerance makes the QS3VH253 ideal for high perfor-
mance communication applications.
• Bidirectional dataflow with near-zero delay: no added ground
bounce
• Excellent RON matching between channels
• VCC operation: 2.3V to 3.6V
The QS3VH253 is characterized for operation from -40°C to +85°C.
• High bandwidth - up to 500MHz
• LVTTL-compatible control Inputs
• Undershoot Clamp Diodes on all switch and control Inputs
• Low I/O capacitance, 4pF typical
• Available in QSOP and TSSOP packages
APPLICATIONS:
• Hot-swapping
• Multiplexing/demultiplexing
• Low distortion analog switch
• Replaces mechanical relay
• ATM 25/155 switching
FUNCTIONAL BLOCK DIAGRAM
S0
S1
EA
EB
I0 A
I1 A
I2 A
I3 A
I0 B
I1 B
I2 B
I3 B
Y A
Y B
The IDT logo is a registered trademark of Integrated Device Technology, Inc.
INDUSTRIAL TEMPERATURE RANGE
FEBRUARY 2014
1
c
2014 Integrated Device Technology, Inc.
DSC-5945/11