WORLD-BEAM QS18
Specifications
Supply Voltage
Output Configuration
10 to 30V dc (10% maximum ripple) at less than 25
mA, exclusive of load;
Protected against reverse polarity and transient voltag-
es
Solid-state complementary (SPDT): NPN or PNP (cur-
rent sinking or sourcing), depending on model;
Rating: 100 mA maximum each output at 25°C
Off-state Leakage Current (FF Mode): less than 200 μA
@ 30V dc
Repeatability
Opposed Mode: 100 microseconds
FF Mode: 160 microseconds
Off-state Leakage Current (All others): less than 50 μA
@ 30V dc
ON-state Saturation Voltage: less than 1V @ 10 mA;
less than 1.5V @ 100 mA
All others: 150 microseconds
Adjustments
Protected against false pulse on power-up and continu-
ous overload or short circuit of outputs
Output Response
Glass Fiber Optic, Plastic Fiber Optic, Convergent, Dif-
fuse, and Retroreflective mode models (only): Single-
turn sensitivity (Gain) adjustment potentiometer
Indicators
Opposed Mode: 750 microseconds ON; 375 microsec-
onds OFF
FF Mode: 850 microseconds ON/OFF
All others: 600 microseconds ON/OFF
NOTE: 100 millisecond delay on power-up; outputs do
not conduct during this time
2 LED indicators on sensor top:
Green ON steady: Power ON
Yellow ON steady: Light sensed
Green flashing: Output overloaded
Yellow flashing: Marginal excess gain (1 to 1.5x ex-
cess gain)
Environmental
Rated IEC IP67; NEMA 6
Operating Conditions
Prior to date code 0223, the output indicator was red.
Construction
Temperature: -20 to +70 °C (-4 to +158 °F)
Relative Humidity: 90% @ 50º C (non-condensing)
Certifications
ABS housing
3 mm mounting hardware included
Connections
2 m (6.5 ft) 4-wire PVC cable, 9 m (30 ft) 4-wire PVC
cable, 4-pin Pico-style or Euro-style QD, 4-pin Pico-
style or Euro-style 150 mm (6 in) pigtail QD, depending
on model
P/N 63908 Rev. H
www.bannerengineering.com - tel: 763-544-3164
3