®
R-GAGE Q240RA-AF2 Sensor
Datasheet
Radar-Based Dual-Zone Narrow-Beam Sensors for Detection of Moving and Stationary Targets
•
•
•
FMCW (true-presence) radar detects moving and stationary objects
Narrow 11° × 13° beam pattern
Two independent, adjustable sensing zones detect objects up to 40 meters
away (131.2 ft)
•
•
•
•
Easy setup and configuration of range, sensitivity, and output with simple DIP
switches
Sensing functions are unaffected by wind, falling rain or snow, fog, humidity,
air temperatures, or light
Sensor operates in Industrial, Scientific, and Medical (ISM) telecommunication
band
Rugged IP67 housing withstands harsh environments
Protected by US patents
Sensing
Range
Supply
Connection
Model
Telecom Approval
Output
Voltage
Q240RA-US-AF2Q
Q240RA-EU-AF2Q
Two
independent
sensing
zones; 1 to
40+ meters
(131 ft)
Telecom approved for US and Canada
5-pin M12
quick
disconnect
DIP-switch-
selectable NPN or
PNP; N.O. or N.C.
Telecom approved for Europe, UK,
Australia, and New Zealand
12 to 30 V
dc
Q240RA-CN-AF2Q
Telecom approved for China
CAUTION: Make No Modifications to this Product
Any modifications to this product not expressly approved by Banner Engineering could void the user's
authority to operate the product. Contact Banner Engineering for more information.
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to
serious injury or death. This device does not include the self-checking redundant circuitry necessary
to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an
energized or de-energized sensor output condition.
Overview
The R-GAGE sensor emits a well-defined beam of high-frequency radio waves from an internal antenna. Some of this
emitted energy is reflected back to the receiving antenna. Signal processing electronics determine the distance from the
sensor to the object based on the time delay of the return signal. The sensor can be configured to two independent
sensing zones.
The two sensing zones are factory pre-set to default distances; they can be reconfigured for different distances using the
DIP switches on the side of the sensor. The sensor is plug-in ready for immediate operation.
The sensitivity is precalibrated at the factory, assuming that the sensing field will be clear of obstacles. The sensitivity can
be adjusted using the DIP switches on the side of the sensor.
Original Document
184564 Rev. C
17 August 2016
184564
5秒后页面跳转
SI2301 N沟道MOSFET：资料手册参数分析
ADC0809逐次逼近寄存器型模数转换器：资料手册参数分析
AD9361捷变收发器：全面参数解析与关键特性概览
IRF3205功率MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
