®
WORLD-BEAM Q12 Series Sensor
Output Protection Circuitry
Output Ratings
Protected against false pulse on power-up, short-circuit protected
OFF-state leakage current:
NPN: 200 µA
PNP: 10 µA
ON-state saturation voltage:
Output Response Time
Opposed Mode: 1.3 ms ON; 900 µs OFF
All Other Modes: 700 µs ON/OFF
NOTE: 120 ms delay on power-up; outputs do not conduct during this time.
NPN: 1.25 V at 50 mA
PNP: 1.45 V at 50 mA
Indicators
One Yellow and one Green LED (see Figure 1)
Vibration and Mechanical Shock
All models meet MIL-STD-202F, Method 201A (Vibration: 10 Hz to 60 Hz
maximum, 0.06 inch (1.52 mm) double amplitude, 10G maximum
acceleration) requirements. Also meets IEC 60947-5-2 (Shock: 30G 11 ms
duration, half sine wave) requirements.
Construction
Polarized Retro Models: Thermoplastic elastomer housing with glass lens
All Other Standard Models: Thermoplastic elastomer housing with
polycarbonate lens
Chemical-Resistant Models: Housing encased in PFA jacket; cable encased
in 3/16 in O.D. PFA tubing
Connections
Required Overcurrent Protection
Standard Models: 2 m (6.5 ft) or 9 m (30 ft) attached PVC cable, or 150 mm
(6 in) pigtail with M8 or M12 threaded connection, depending on the model
WARNING: Electrical connections must be
made by qualified personnel in accordance with
local and national electrical codes and
regulations.
ordered
Chemical-Resistant Models: 2 m (6.5 ft) cable encased in 3/16 in O.D. PFA
tubing
Environmental Rating
Standard Models: IEC IP67
Chemical-Resistant Models: IEC IP67 (NEMA6) and PW12 1200 psi
washdown per NEMA ICS5, Annex F-2002
Overcurrent protection is required to be provided by end product
application per the supplied table.
Overcurrent protection may be provided with external fusing or via Current
Limiting, Class 2 Power Supply.
Supply wiring leads < 24 AWG shall not be spliced.
For additional product support, go to www.bannerengineering.com.
Conditions
Operating Temperature: –20 °C to +55 °C (–4 °F to +131°F)
Storage Temperature: –30 °C to +75 °C (–22 °F to +167 °F)
95% at +50 °C maximum relative humidity (non-condensing)
Supply Wiring (AWG)
Required Overcurrent Protection (Amps)
20
22
24
26
28
30
5.0
3.0
2.0
1.0
0.8
0.5
Certifications
(Chemical-resistant models are
not UR/UL approved.)
Dimensions
12.4 mm
(0.49")
M3 mounting
screws included
8.0 mm
(0.31")
Polarized Retro
Models
15.0 mm
(0.59")
4.7 mm
(0.19")
5.1 mm
(0.20")
Emitter (opposed mode models)
Emitter (all other models)
23.1 mm
(0.91")
22 mm
(0.86")
3.4 mm
(0.13")
3.5 mm
(0.14")
Ø 3 mm (0.12")
max. torque
0.9 Nm (8 in-lbf)
Figure 1. Standard Models
4
www.bannerengineering.com - Tel: + 1 888 373 6767
P/N 119223 Rev. K
5秒后页面跳转
SI2301 N沟道MOSFET：资料手册参数分析
ADC0809逐次逼近寄存器型模数转换器：资料手册参数分析
AD9361捷变收发器：全面参数解析与关键特性概览
IRF3205功率MOSFET：资料手册参数分析
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
