Datasheet > PN5331B3HN

PN5331B3HN

更新时间： 2022-02-26 13:26:50

品牌	Logo	应用领域
恩智浦 - NXP		/
页数	文件大小	规格书
236页	1770K
描述
Near Field Communication (NFC) controller

阅读下载

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PN5331B3HN 数据手册

PN5331B3HN

Near Field Communication (NFC) controller

Rev. 3.4 — 29 November 2017

157534

Product data sheet

COMPANY PUBLIC

1. General description

The PN533 is a highly integrated transceiver module for contactless communication at

13.56 MHz based on the 80C51 microcontroller core. It supports 6 different operating

modes:

• ISO/IEC 14443A/MIFARE Reader/Writer

• FeliCa Reader/Writer

• ISO/IEC 14443B Reader/Writer

• ISO/IEC 14443A/MIFARE Card MIFARE 1 KB or MIFARE 4 KB emulation

• FeliCa Card emulation

• ISO/IEC 18092, ECMA 340 Peer-to-Peer

The PN533 implements a demodulator and decoder for signals from

ISO/IEC 14443A/MIFARE compatible cards and transponders. The PN533 handles the

complete ISO/IEC 14443A framing and error detection (Parity & CRC).

The PN533 supports MIFARE 1 KB or MIFARE 4 KB emulation products. The PN533

supports contactless communication using MIFARE Higher transfer speeds up to

424 kbit/s in both directions.

The PN533 can demodulate and decode FeliCa coded signals. The PN533 handles the

FeliCa framing and error detection. The PN533 supports contactless communication

using FeliCa Higher transfer speeds up to 424 kbit/s in both directions.

The PN533 supports layers 2 and 3 of the ISO/IEC 14443 B Reader/Writer

communication scheme, except anticollision. This must be implemented in firmware as

well as upper layers.

In card emulation mode, the PN533 is able to answer to a Reader/Writer command either

according to the FeliCa or ISO/IEC 14443A/MIFARE card interface scheme. The PN533

generates the load modulation signals, either from its transmitter or from the LOADMOD

pin driving an external active circuit. A complete secure card functionality is only possible

in combination with a secure IC using the NFC-WI/S²C interface.

Compliant to ECMA 340 and ISO/IEC 18092 NFCIP-1 Passive and Active communication

modes, the PN533 offers the possibility to communicate to another NFCIP-1 compliant

device, at transfer speeds up to 424 kbit/s.The PN533 handles the complete NFCIP-1

framing and error detection.

The PN533 transceiver can be connected to an external antenna for Reader/Writer or

Card/PICC modes, without any additional active component.

12 3 4 5 6 7...236

下载PDF

与PN5331B3HN相关器件

型号	品牌	描述	获取价格	数据表
PN5331B3HN/C270	NXP	IC DATACOM, NETWORK INTERFACE SUPPORT CIRCUIT, PQCC40, 6 X 6 MM, 0.85 MM HEIGHT, PLASTIC,	获取价格
PN5331B3HN/C270,55	NXP	PN5331B3HN - USB NFC integrated solution QFN 40-Pin	获取价格
PN5331B3HN/C270:55	NXP	PN5331B3HN - USB NFC integrated solution QFN 40-Pin	获取价格
PN5331B3HNC270	NXP	Near Field Communication (NFC) controller	获取价格
PN5338	APITECH	Wide Band Medium Power Amplifier, 5MHz Min, 150MHz Max, SM-11, 4 PIN	获取价格
PN5352	APITECH	10 MHz - 300 MHz RF/MICROWAVE WIDE BAND LOW POWER AMPLIFIER, SM-11, 4 PIN	获取价格