For more information, please visit the product page.
CUI Inc │SERIES: PDQ10-D │ DESCRIPTION: DC-DC CONVERTER
date 07/12/2016 │ page 8 of 9
APPLICATION NOTES
Output Voltage Trimming
The output voltage can be adjusted (single outputs only) by using the trim pin and the use of either an external trim pot or
the use of a single fixed resistor (see Figures below). If the trim function is not needed, leave the trim pin open.
Figure 4 Trim Adjustments Using
A Trimpot
Figure 5 Trim Adjustments To Increase
Output Voltage Using A Fixed Resistor
Figure 6 Trim Adjustments To Decrease
Output Voltage Using A Fixed Resistor
+Vo
+Vo
+Vo
+Vin
+Vin
+Vin
Trim
R trim-down
R-Load
10 kΩ
Trimpot
Trim
-Vo
R-Load
R-Load
R trim-up
Trim
-Vin
-Vin
-Vo
-Vin
-Vo
Formula for Trim Resistor
Vr R1 (R2 R3)
(Vo Vo, nom ) R2
R
trim up
(
) Rt (k )
Output
R1
(kΩ)
R2
(kΩ)
R3
(kΩ)
Rt
(kΩ)
Vr
(V)
Voltage
(Vdc)
Vr R1
(Vo, nom Vo) R2
3.3
2.74
2.32
6.8
1.8
2.32
2.4
0.27
0
9.1
8.2
22
1.24
2.5
2.5
2.5
R
trim down R1 (
1) Rt (k )
Table 5
5
12
15
2.32
3.9
Note: Rtrim-up is the external resistor in kΩ
Rtrim-down is the external resistor in kΩ
VO, nom is the nominal output voltage
VO is the desired output voltage
8.06
2.4
27
R1, R2, R3, Rt, and Vr are internal (see Table 5).
cui.com