8-ch Relay and 8-ch Isolated Digital
Input PCI Express Card
PCIE-1760
Features
8 opto-isolated digital input channels with counter/timer function
8 relay actuator output channels
2 opto-isolated PWM outputs
LED indicators to show activated relays
Jumper selectable dry contact/wet contact input signals
Up event counters for DI
Programmable digital filter function for DI
Pattern match interrupt function for DI
"Change of state" interrupt function for DI
BoardID switch
RoHS
COMPLIANT
2002/95/EC
Introduction
PCIE-1760 relay actuator and isolated digital input card is a PC add-on card for the PCI Express bus. It meets the PCI Express standard Rev. 1.0. It provides 8 opto-isolated digital
inputs with isolation protection of 2,500 VDC for collecting digital inputs in noisy environments, 8 relay actuators that can be used as a on/off control devices or small power switches,
and 2 isolated PWM (Pulse Width Modulation) outputs for custom applications.
For easy monitoring, each relay is equipped with one red LED to show its on/off status. Each isolated input supports both dry contact and wet contact so that it can easily interface
with other devices when no voltage is present in the external circuit.
Specifications
Isolated Digital Input
General
Channels
8
Bus Type
PCI Express V1.0
Input Voltage
Logic 0: 1.0 V max.
Logic 1: 4.5 V min. (12 V max.)
8
I/O Connectors
Dimensions (L x H)
Power Consumption
1 x DB37 female connector
168 x 100 mm (6.6" x 3.9")
Typical: 5 V @ 450 mA
Max.: 5 V @ 850 mA
Interrupt Capable Ch.
Isolation Protection
2,500 VDC
Opto-Isolator Response 25 μs
Operating Temperature 0 ~ 60°C (32 ~ 140°F)
Storage Temperature -20 ~ 70°C (-4 ~ 158°F)
Input Resistance
2 kW 1/4 W
Storage Humidity
5 ~ 95 % RH, non-condensing
Counter/Timer
Channels
Resolution
Compatibility
8
Ordering Information
16 bits
5 V/TTL
PCIE-1760
8-ch Relay/IDI PCIe Card w/ 10-ch Counter/Timer
Max. Input Frequency 500 Hz
Accessories
Isolation Protection
PWM Channels
2,500 VDC
2
PCL-10137-1E
PCL-10137-2E
PCL-10137-3E
ADAM-3937
DB37 Cable, 1 m
DB37 Cable, 2 m
DB37 Cable, 3 m
DB37 DIN-rail Wiring Board
Digital Noise Filter
Min. effective high input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Min. effective low input period ≥ [(2 ~ 65535) x 5 ms]
+ 5 ms
Relay Output
Channels
8
Relay Type
Contact Rating
2 x Form C, and 6 x Form A
1 A @ 125 VAC, 2 A @ 30 VDC
Max. Switching Power 125 VA, 60 W
Max. Switching Voltage 250 VAC, 220 VDC
Max. Switching Current 2 A
Operate/Release Time 5 / 3.5 ms max
Resistance
Contact: 50 mW max.
Insulation: 100 MW min. @ 500 VDC
3 x 105 cycles min.: 2 A @ 30 VDC, 1 A @ 125 VAC
106 cycles min.: 1 A @ 30 VDC, 0.5 A @ 125 VAC
Life Expectancy
(Electrical)
Data Acquisition Boards
All product specifications are subject to change without notice
Last updated : 5-May-2015