PCI-7442/7443/7444
High-density 128-CH Isolated DIO/DI/DO Cards
Introduction
Responding to the industry’s need for high-density digital input/output modules, the ADLINK PCI-744X DIO
card series delivers up to 128 opto-isolated channels for a wide range of demanding PCI-based applications.
The PCI-744X card series comes with 64 (PCI-7442) or 128 (PCI-7443) opto-isolated digital inputs and 64 (PCI-7442)
or 128 (PCI-7444) opto-isolated digital outputs. With a 1250 VRMS (excluding cables) channel-to-system isolation protection,
these cards are shielded from damage caused by accidental contact with external voltage while promoting simple ground
connections. All input channels are identical non-polarity with each line isolated and suited to collect digital inputs even
at high-noise environments. Featuring a Change-of-State (COS) interrupt function, the PCI-7442/PCI-7443 instantly
generates an interrupt request to the PCI controller when it detects a sharp change in the logical state of any of its digital
inputs.
PCI-7442
For easy identification in systems with multiple DIO cards installed, the cards are also equipped with a board ID design
that enables fast and convenient card detection and troubleshooting.
Terminal Boards & Cables
■ DIN-68S-01
Specifications
Isolated Digital Input
PCI-7443
Terminal Board with One 68-pin SCSI-II Connector
and DIN-Rail Mounting (Cables are not included.)
■ ACL-10568D
■
Number of channels
• 64 (PCI-7442)
• 128 (PCI-7443)
Maximum input range: 28 V, non-polarity
Digital logic levels: 0 V to 28 V, non-polarity
• Input high voltage: 5 V to 28 V
• Input low voltage: 0 V to 1.5 V
Input resistance: 4.7 kΩ @ 0.5 W
ESD protection CKT switch (forward)
Isolation voltage: 1250 VRMS channel-to-system
Dual-68-Pin Head to Two 68-Pin SCSI-VHDCI Cable
■
■
■ ACL-10568F
68-Pin SCSI-VHDCI Flat Cable
* For more information on mating cables, please refer to P2-61/62.
■
■
PCI-7444
■
Ordering Information
■
Interrupt sources: 64/128-channel Change-of-State
(COS)
■ PCI-7442
64-CH Isolated DI and 64-CH Isolated DO card
■
Data transfer: programmed I/O
Features
■
Supports universal 32-bit 3.3 V and 5 V PCI bus, plug-and-play
High-density, opto-isolated digital input and/or digital output
•ꢀPCI-7442:ꢀ64-CHꢀdigitalꢀinputꢀandꢀ64-CHꢀdigitalꢀoutput
•ꢀPCI-7443:ꢀ128-CHꢀdigitalꢀinput
•ꢀPCI-7444:ꢀ128-CHꢀdigitalꢀoutput
1250 VRMS isolation voltage
Programmable Change-of-State (COS) detection for all
digital input channels
Voltage protection of up to 28 V for isolated input
Dry contact input (PCI-7442 only)
Up to 300 mA high-output driving capability for all output
channels
Isolated Digital Output
■ PCI-7443
■
128-CH Isolated DI card
■
Number of channels:
ꢀ
ꢀ
• 64 (PCI-7442)
• 128 (PCI-7444)
■ PCI-7444
128-CH Isolated DO card
ꢀ
■
■
Output type: open drain Power MOSFET driver
■
■
Output range: 5 V to 40 V
Sink current: 250 mA for all channel @ 100% duty
■
■
■
■
(300 mA max.)
Isolation voltage: 1250 VRMS channel-to-system
Data transfer: programmed I/O
■
■
■
■
■
■
■
250 mA sink current on isolated output channels
Digital output status read back function
Digital output value retained after hot system reset
Programmable power-up DO initial status
Programmable safety DO status functions when
WDTꢀinterruptionꢀoccurs
Isolation +5 V Power Supply (PCI-7442/7444 only)
■
Output Voltage: +5 V
■
Output Current: 100 mA max. (@ 40˚C)
Safety Functions (PCI-7442/7444 only)
■
ꢀ Watchdogꢀtimerꢀcounterꢀpreventsꢀsystemꢀcrashes
(PCI-7442/PCI-7444 only)
■
Programmable power-up DO status
■
■
■
32-CH programmable TTL I/O function
Board ID feature
Watchdog timer
• Base clock available: 10 MHz, fixed
• Counter width: 32-bit
■ Operating Systems
• Windows 7/Vista/XP/2000/2003 Server
• Linux
General Specifications
■
I/O connector: 68-pin Dual port VHDCI female
■ Recommended Software
• AD-Logger
• VB.NET/VC.NET/VB/VC++/BCB/Delphi
• DAQBench
■
Operating temperature: 0˚C to 60˚C
■
Storage temperature: -20˚C to 80˚C
■
Relative humidity: 5% to 95%, non-condensing
■
Power requirements
■ Driver Support
Device
+5 V
• DAQPilot for LabVIEW™
• DAQ-MTLB for MATLAB®
• PCIS-DASK for Windows
• PCIS-DASK/X for Linux
PCI-7442
PCI-7443
PCI-7444
800 mA typical
550 mA typical
800 mA typical
■
Dimension: 175 mm x 107 mm
2-49
www.adlinktech.com
5秒后页面跳转
SZNUP2105LT1G电气参数、产品特性详解
FT232RL资料解读：引脚说明、参数详情、产品特性
RC0402FR-07100KL资料解读：电气参数、产品特性
RC0603FR-070R数据手册解读：特性、应用与替换型号推荐
微信公众号
抖音公众号
浙公网安备 33010502006866号 浙ICP备10014259号-119
营业执照ICP证
数据手册
如果您发现信息不准确，
