PAH 28Vout, 450-Watt Series
Isolated, 450-Watt, Half-Brick DC-DC Converter
Output (V)
Current (A)
Input Voltage (V)
28
16
36-75
FEATURES
PRODUCT OVERVIEW
For applications requiring improved electrical and
thermal performance, consider Murata’s new PAH
series “half brick” DC-DC power converters. These
compact modules measure 2.3" X 2.4" X 0.5" (58
X 61 X 12.7mm) and offer the industry-standard
Half Brick footprint.
The module provides a 28Vdc (@16A) output and
accepts a wide input voltage range of 36-75Vdc. The
PAH topology offers high efficiency (up to 93.5%),
tight line and load regulation, low ripple/noise, and
a fast dynamic load response. A single-board, highly
optimized thermal design contributes to the superior
thermal performance.
Wide Vout trim range (see specifications)
Industry standard “half brick” package
High efficiency: up to 93.5%
Outstanding thermal performance
Standard baseplate for conduction cooled
applications
The PAH Series is ideal for power amplifier
applications, wireless networks, and telecom
applications. The baseplate provides a means for
conduction cooling in demanding thermal environ-
ment conditions.
No output reverse conduction
These half-bricks provide output trim, sense
pins, and primary side on/off control. Standard fea-
tures also include input under-voltage shutdown,
output over-voltage protection, output short-circuit/
current limiting protection, and thermal shutdown.
Input to output isolation, 2250Vdc (Basic)
Input under-voltage lockout
On/off control (positive or negative logic)
Output over-voltage protection
Thermal shutdown
Output short circuit protection (hiccup
technique)
Certified to UL/EN 60950-1, CSA-C22.2 No.
60950-1, 2nd edition safety approvals
F1
+Vin
+Vout
Barrier
Case ground
External
DC
NOTE: A minimum of 470μF
of capacitance is required
on the output to ensure
Controller
and Power
Power
Source
Cout
stable operation. An ESR
equal to or less than 0.02Ω
is also required.
Open = On
On/Off
Control
Reference and
Error Amplifier
Trim
logic)
-Vin
-Vout
Figure 1. Simplified Schematic
Typical topology is shown. Some models may vary slightly.
For full details go to
www.murata-ps.com/rohs
www.murata-ps.com/support
MDC_PAH-28Vout-450W.B04 Page 1 of 16