Datasheet > PA5187.101HLT

PA5187.101HLT

更新时间： 2024-01-29 00:51:10

品牌	Logo	应用领域
普思电子 - PULSE		/
页数	文件大小	规格书
3页	623K
描述
SMT Power Inductors

阅读下载

中文翻译

获取价格

数据手册

如果您发现信息不准确，欢迎纠错

PA5187.101HLT 数据手册

SMT Power Inductors

Power Beads - PA5187.XXXHLT Series

POWER PRODUCTS

Current Rating: Up to 100Apk

Inductance Range: 100nH to 180nH

Height: 8.2mm Max

Footprint: 10.8mm x 8.2mm Max

Electrical Specifications @ 25°C — Operating Temperature - 40°C to +130°C ⁷

Saturation Current⁵

(A TYP)

Inductance¹

@ 0ADC

Inductance²

@Irated

Irated³

DCR⁴

Heating Current⁶

(A TYP)

Part

Number

(ADC)

(mΩ Max)

(nH +/- 10%)

(nH TYP)

25°C

100

100°C

PA5187.101HLT

PA5187.121HLT

PA5187.151HLT

PA5187.181HLT

100

120

150

180

100

120

112

0.12

144

NOTES:

1. Inductance measured at 100kHz, 100mVrms.

7. In high volt*time applications, additional heating in the component can occur due

to core losses in the inductor which may neccessitate derating the current in order

to limit the temperature rise of the component. To determine the approximate total

losses (or temperature rise) for a given application, the coreloss and temperature rise

curves can be used.

2. Inductance at Irated is the value of the inductance at 25°C at the listed rated current.

3. The rated current as listed is either the saturation current (25°C or 100°C) or the heat-

ing current depending on which value is lower.

4. The nominal DCR is measured at point

drawing.

, as shown below on the mechanical

8. Parts with the HLT suﬃx are sold in tape and reel packaging. Pulse complies to

industry standard tape and reel speciﬁcation EIA-481.

5. The saturation current is the typical current which causes the inductance to drop by

20% at the stated ambient temperatures (25°C, 100°C ). This current is determined by

placing the component in the speciﬁed ambient environment and applying a short

duration pulse current (to eliminate self-heating eﬀects) to the component.

The tape and reel for this product has a width (W=24mm), pitch (Po=16mm) and depth

(Ko=8.7mm). Samples of these parts can be ordered by removing the HLT suﬃx and

replacing with HL.

9. The temperature of the component (ambient plus temperature rise) must be within

the stated operating temperature range.

6. The heating current is the DC current which causes the part temperature to increase by

^{approximately 40°C when used in a typical applicati}M^one^.chanical

PA5187.XXXHLT

Schematic

Weight:

....... 3.28grms

....... 400/ Reel

Tape & Reel:

Dimensions:

Unless otherwise speciﬁed ,

all tolerances are 0.25

Power.PulseElectronics.com

P891. A (07/20)

12 3

中文翻译

下载PDF

与PA5187.101HLT相关器件

型号	品牌	获取价格	描述	数据表
PA5187.121HLT	PULSE	获取价格	SMT Power Inductors
PA5187.151HLT	PULSE	获取价格	SMT Power Inductors
PA5187.181HLT	PULSE	获取价格	SMT Power Inductors
PA5187.XXXHLT	PULSE	获取价格	SMT Power Inductors
PA51A	CIRRUS	获取价格	POWER OPERATIONAL AMPLIFIERS
PA51A	APEX	获取价格	POWER OPERATIONAL AMPLIFIERS
PA51CE	CIRRUS	获取价格	Operational Amplifier, 1 Func, 10000uV Offset-Max, MBFM8, ROHS COMPLIANT, HERMETIC SEALED,
PA51EC	E-SWITCH	获取价格	Product Search
PA51M	APEX	获取价格	TABLE 4 GROUP A INSPECTION
PA51M	CIRRUS	获取价格	Table 4 Group A Inspection