Ordering Information4
OX - 208 0 - D A E - 400 1 - 10M0000000
Frequency
5M00000000
10M0000000
20M0000000
Product Family
OX: OCXO
Model
208
(others available on request)
Frequency Control
0:Fixed frequency
1: 250 to 500 ppb
Height and Package
0: 12.7 mm, package A - THT
1: 15.7 mm, package B - SMD
Supply Voltage
D: 5V
E: 3.3V
Stability Code
400: 0.4 ppb (f=<10 MHz, temp code T only )
600: 0.6 ppb (f=<10 MHz, temp code T or J only))
800: 0.8ppb (f=<10 MHz)
RF Output Code
A: HCMOS
E: Sinewave
109: 1ppb
209: 2 ppb
Temperature Range
E: -40°C to +85°C
J: -20°C to +70°C
T: 0°C to +70°C
Additional Ordering Options
Additional ordering options available include custom heights, custom aging rates, custom temperature ranges, custom
temperature stabilities, custom phase noise requirements, improved g-sensitivity, and oscillators with voltage reference output.
on pin 4. These modifications require a custom dash number - please contact the factory for additional information.
Design Tools
Vectron stocks the following items for small orders and prototype development:
OX-2080-DEE-8001-10M00000000
Vectron stocks the following evaluation board for this product:
OCXO Evaluation Board
Application Notes:
None
Notes:
1. Unless otherwise stated, all values are valid after warm-up time and refer to typical conditions for supply voltage, frequency
control voltage, load, and temperature (25°C).
2. Retrace defined as f1-fo where fo is the reading after the unit has been on power for 24 hours, and f1 is the frequency after 24
hours off followed by 60 minutes on.
3. Phase noise degrades with increasing output frequency.
4. Not all options and codes available at all frequencies.
Contact Information
USA:
Europe:
Landstrasse
100 Watts Street
Mt Holly Springs, PA 17065
Tel: 1.717.486.3411
74924 Neckarbischofsheim
Germany
Tel: +49 (0) 7268.801.0
Fax: +49 (0) 7268.801.281
Fax: 1.717.486.5920
Information contained in this publication regarding device applications and the like is provided only for your convenience and
may be superseded by updates. It is your reasonability to ensure that your application meets with your specifications. MICROCHIP
MAKES NO REPRESENTATION OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATU-
TORY OR OTHERWISE, RELATED TO THE INFORMATION INCLUDING, BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFOR-
MANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use.
Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend,
indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses
are conveyed, implicitly, or otherwise, under any Microchip intellectual property rights unless otherwise stated.
Trademarks
The Microchip and Vectron names and logos are registered trademarks of Microchip Technology Incorporated in the U.S.A. and
other countries.
Rev: 12-1-2021 jar
Page 5 of 5