Optiva OTS-2 40 GHz Unamplified
Microwave Band Fiber Optic Links
DATASHEET | DECEMBER 2015
MICROWAVE
Mechanical Configuration
Each Transmitter and Receiver module occupies two slots in the EMCORE Optiva Chassis.
RX Power, Link Status
& Optical I/P Level
Status Indicators
Laser & TX Power
Status Indicators
RF Input
RF Output
Laser Power Key
Optical Output
Optical Input
Comm Port
Comm Port
Optical Output
Laser Safety
This product meets the appropriate standard in Title 21 of the Code of Federal Regulations (CFR). FDA/CDRH Class 1M laser
product. All versions of this laser are Class 1M laser product, tested according to IEC 60825-1:2007 / EN 60825-1:2007. An
additional warning for Class 1M laser products. For diverging beams, this warning shall state that viewing the laser output
with certain optical instruments (for example: eye loupes, magnifiers, and microscopes) within a distance of 100 mm may
pose an eye hazard. For collimated beams, this warning shall state that viewing the laser output with certain instruments
designed for use at a distance (for example: telescopes and binoculars) may pose an eye hazard.
Wavelength = 1.3/1.5 μm.
INVISIBLE LASER RADIATION
AVOID DIRECT EXPOSURE
TO BEAM
INVISIBLE LASER RADIATION IS
EMITTED FROM THE END OF
FIBER OR CONNECTOR
Maximum power = 30 mW.
Wavelength: 1.5 µm
Max. Output: 50 mW
Class 1M Laser Product
Avoid direct exposure to beam
Do not view beam directly with
optical instruments
INVISIBLE LASER RADIATION EMITTED FROM END OF FIBER OR CONNECTOR
CLASS 1M LASER PRODUCT IEC 60825-1:2007 EN 60825-1:2007
MAX OUTPUT: 50 mW WAVELENGTH: 1.5 µm (+ 1460 to 1620 nm)
Complies with 21 CRF 1040.10 and 1040.11 except for deviations pursuant
to Laser Notice No. 50, dated June 24, 2007
G8760-073-001 REV.3
*Caution - Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
*IEC is a registered trademark of the International Electrotechnical Commision.
© 2015 EMCORE Corporation | REV 2015.12
satcom-sales@emcore.com
www.emcore.com
+1 626-293-3400
Information contained herein is deemed to be reliable and accurate as of the issue date. EMCORE reserves the right to change the design or specifications at any time without notice.