Optically Coupled Isolator
OPI110, OPI1264 Series
Electrical Specifications
Absolute Maximum RaƟngs (TA = 25o C unless otherwise noted)
Storage Temperature
‐40° C to +100° C
‐40° C to +85° C
± 15 kVDC
Operaꢁng Temperature
Input‐to‐Output Isolaꢁon Voltage(1)(2)
Lead Soldering Temperature (1/16” (1.6 mm) from case for 5 seconds with soldering iron)(3)
260° C
Input Diode
Forward DC Current
Reverse DC Voltage
Power Dissipaꢁon(4)
Output Photosensor
40 mA
2 V
50 mW
Collector‐Emiꢀer Voltage
OPI110, OPI1264
30
5
Emiꢀer‐Collector Voltage
Power Dissipaꢁon(5)
100 mW
Notes:
(1) Measured with input and output leads shorted. Typical input/output capacitance is 0.06 pF.
(2) UL recogniꢁon is for 15 kV dc for one minute.
(3) RMA flux is recommended. The duraꢁon can be extended to 10 seconds maximum when flow soldering.
(4) Derate linearly 0.83 mW/°C above 25° C.
(5) Derate linearly 1.67 mW/°C above 25° C..
OPI1264
1
4
3
2
OPI110
1
4
3
2
General Note
TT Electronics | OPTEK Technology
2900 E. Plano Pkwy, Plano, TX 75074 | Ph: +1 972 323 2200
TT Electronics reserves the right to make changes in product specificaꢁon without
noꢁce or liability. All informaꢁon is subject to TT Electronics’ own data and is
considered accurate at ꢁme of going to print.
www.ꢀelectronics.com | sensors@ꢀelectronics.com
Rev D 10/2022 Page 2
© TT electronics plc