OPA202, OPA2202, OPA4202
ZHCSGW0E –OCTOBER 2017–REVISED FEBRUARY 2020
www.ti.com.cn
6 Specifications
6.1 Absolute Maximum Ratings
over operating free-air temperature range (unless otherwise noted)(1)
MIN
MAX
40
UNIT
V
Single-supply
Dual-supply
Supply voltage,
VS = (V+) – (V–)
±20
Common-mode(2)
Differential(3)
(V–) – 0.5
(V+) + 0.5
±0.5
Voltage
Current
Signal input pins
±10
mA
Output short current(4)
Continuous
Operating temperature, TA
Junction temperature, TJ
Storage temperature, Tstg
–40
125
125
150
°C
–65
(1) Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings
only, which do not imply functional operation of the device at these or any other conditions beyond those indicated under Recommended
Operating Conditions. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Input terminals are diode-clamped to the power-supply rails. Input signals that swing more than 0.5 V beyond the supply rails must be
current-limited to 10 mA or less.
(3) Input terminals are anti-parallel diode-clamped to each other. Input signals that cause differential voltages of swing more than ± 0.5 V
must be current-limited to 10 mA or less.
(4) Short-circuit to ground, one amplifier per package.
6.2 ESD Ratings
VALUE
±2500
±1000
UNIT
Human body model (HBM), per ANSI/ESDA/JEDEC JS-001(1)
Charged device model (CDM), per JEDEC specification JESD22-C101(2)
V(ESD)
Electrostatic discharge
V
(1) JEDEC document JEP155 states that 500-V HBM allows safe manufacturing with a standard ESD control process.
(2) JEDEC document JEP157 states that 250-V CDM allows safe manufacturing with a standard ESD control process.
6.3 Recommended Operating Conditions
over operating free-air temperature range (unless otherwise noted)
MIN
4.5
NOM
MAX
36
UNIT
Single-supply
Dual-supply
VS
TA
Supply voltage, [ (V+) – (V–) ]
Specified temperature
V
±2.25
–40
±18
105
°C
6
Copyright © 2017–2020, Texas Instruments Incorporated