NXB0108-Q100
Dual supply translating transceiver; auto direction sensing;
3-state
Rev. 2 — 3 November 2021
Product data sheet
1. General description
The NXB0108-Q100 is an 8-bit, dual supply translating transceiver with auto direction sensing, that
enables bidirectional voltage level translation. It features two 8-bit input-output ports (An and Bn),
one output enable input (OE) and two supply pins (VCC(A) and VCC(B)). VCC(A) can be supplied at
any voltage between 1.2 V and 3.6 V and VCC(B) can be supplied at any voltage between 1.65 V
and 5.5 V, making the device suitable for translating between any of the low voltage nodes (1.2 V,
1.5 V, 1.8 V, 2.5 V, 3.3 V and 5.0 V).
Pins An and OE are referenced to VCC(A) and pins Bn are referenced to VCC(B). A LOW level at pin
OE causes the outputs to assume a high-impedance OFF-state. This device is fully specified for
partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing the
damaging backflow current through the device when it is powered down.
This product has been qualified to the Automotive Electronics Council (AEC) standard Q100
(Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
•
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide supply voltage range:
VCC(A): 1.2 V to 3.6 V and VCC(B): 1.65 V to 5.5 V
•
•
•
•
•
•
IOFF circuitry provides partial Power-down mode operation
Inputs accept voltages up to 5.5 V
ESD protection:
•
•
•
HBM: ANSI/ESDA/Jedec JS-001 Class 2 exceeds 2500 V for A port
HBM: ANSI/ESDA/Jedec JS-001 Class 3B exceeds 15000 V for B port
CDM: ANSI/ESDA/Jedec JS-002 Class C3 exceeds 1500 V
•
•
•
Latch-up performance exceeds 100 mA per JESD 78B Class II
Multiple package options
DHVQFN package with Side-Wettable Flanks enabling Automatic Optical Inspection (AOI) of
solder joints
3. Ordering information
Table 1. Ordering information
Type number
Package
Temperature range Name
Description
Version
NXB0108PW-Q100 −40 °C to +125 °C
TSSOP20
plastic thin shrink small outline package; 20 leads;
body width 4.4 mm
SOT360-1
NXB0108BQ-Q100 −40 °C to +125 °C
DHVQFN20 plastic dual in-line compatible thermal enhanced
very thin quad flat package; no leads; 20 terminals;
body 2.5 × 4.5 × 0.85 mm
SOT764-1